pseudo-distributed.ini.tmpl 35 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050
  1. #####################################
  2. # DEVELOPMENT EDITION
  3. #####################################
  4. # Hue configuration file
  5. # ===================================
  6. #
  7. # For complete documentation about the contents of this file, run
  8. # $ <hue_root>/build/env/bin/hue config_help
  9. #
  10. # All .ini files under the current directory are treated equally. Their
  11. # contents are merged to form the Hue configuration, which can
  12. # can be viewed on the Hue at
  13. # http://<hue_host>:<port>/dump_config
  14. ###########################################################################
  15. # General configuration for core Desktop features (authentication, etc)
  16. ###########################################################################
  17. [desktop]
  18. send_dbug_messages=1
  19. # To show database transactions, set database_logging to 1
  20. database_logging=0
  21. # Set this to a random string, the longer the better.
  22. # This is used for secure hashing in the session store.
  23. secret_key=
  24. # Webserver listens on this address and port
  25. http_host=0.0.0.0
  26. http_port=8000
  27. # Time zone name
  28. time_zone=America/Los_Angeles
  29. # Enable or disable Django debug mode
  30. ## django_debug_mode=true
  31. # Enable or disable backtrace for server error
  32. ## http_500_debug_mode=true
  33. # Enable or disable memory profiling.
  34. ## memory_profiler=false
  35. # Server email for internal error messages
  36. ## django_server_email='hue@localhost.localdomain'
  37. # Email backend
  38. ## django_email_backend=django.core.mail.backends.smtp.EmailBackend
  39. # Webserver runs as this user
  40. ## server_user=hue
  41. ## server_group=hue
  42. # This should be the Hue admin and proxy user
  43. ## default_user=hue
  44. # This should be the hadoop cluster admin
  45. ## default_hdfs_superuser=hdfs
  46. # If set to false, runcpserver will not actually start the web server.
  47. # Used if Apache is being used as a WSGI container.
  48. ## enable_server=yes
  49. # Number of threads used by the CherryPy web server
  50. ## cherrypy_server_threads=10
  51. # Filename of SSL Certificate
  52. ## ssl_certificate=
  53. # Filename of SSL RSA Private Key
  54. ## ssl_private_key=
  55. # List of allowed and disallowed ciphers in cipher list format.
  56. # See http://www.openssl.org/docs/apps/ciphers.html for more information on cipher list format.
  57. ## ssl_cipher_list=DEFAULT:!aNULL:!eNULL:!LOW:!EXPORT:!SSLv2
  58. # LDAP username and password of the hue user used for LDAP authentications.
  59. # Set it to use LDAP Authentication with HiveServer2 and Impala.
  60. ## ldap_username=hue
  61. ## ldap_password=
  62. # Default encoding for site data
  63. ## default_site_encoding=utf-8
  64. # Help improve Hue with anonymous usage analytics.
  65. # Use Google Analytics to see how many times an application or specific section of an application is used, nothing more.
  66. ## collect_usage=true
  67. # Support for HTTPS termination at the load-balancer level with SECURE_PROXY_SSL_HEADER.
  68. ## secure_proxy_ssl_header=false
  69. # Comma-separated list of Django middleware classes to use.
  70. # See https://docs.djangoproject.com/en/1.4/ref/middleware/ for more details on middlewares in Django.
  71. ## middleware=desktop.auth.backend.LdapSynchronizationBackend
  72. # Comma-separated list of regular expressions, which match the redirect URL.
  73. # For example, to restrict to your local domain and FQDN, the following value can be used:
  74. # ^\/.*$,^http:\/\/www.mydomain.com\/.*$
  75. ## redirect_whitelist=^\/.*$
  76. # Comma separated list of apps to not load at server startup.
  77. # e.g.: pig,zookeeper
  78. ## app_blacklist=
  79. # The directory where to store the auditing logs. Auditing is disable if the value is empty.
  80. # e.g. /var/log/hue/audit.log
  81. ## audit_event_log_dir=
  82. # Size in KB/MB/GB for audit log to rollover.
  83. ## audit_log_max_file_size=100MB
  84. # A json file containing a list of log redaction rules for cleaning sensitive data
  85. # from log files. It is defined as:
  86. #
  87. # {
  88. # "version": 1,
  89. # "rules": [
  90. # {
  91. # "description": "This is the first rule",
  92. # "trigger": "triggerstring 1",
  93. # "search": "regex 1",
  94. # "replace": "replace 1"
  95. # },
  96. # {
  97. # "description": "This is the second rule",
  98. # "trigger": "triggerstring 2",
  99. # "search": "regex 2",
  100. # "replace": "replace 2"
  101. # }
  102. # ]
  103. # }
  104. #
  105. # Redaction works by searching a string for the [TRIGGER] string. If found,
  106. # the [REGEX] is used to replace sensitive information with the
  107. # [REDACTION_MASK]. If specified with `log_redaction_string`, the
  108. # `log_redaction_string` rules will be executed after the
  109. # `log_redaction_file` rules.
  110. #
  111. # For example, here is a file that would redact passwords and social security numbers:
  112. # {
  113. # "version": 1,
  114. # "rules": [
  115. # {
  116. # "description": "Redact passwords",
  117. # "trigger": "password",
  118. # "search": "password=\".*\"",
  119. # "replace": "password=\"???\""
  120. # },
  121. # {
  122. # "description": "Redact social security numbers",
  123. # "trigger": "",
  124. # "search": "\d{3}-\d{2}-\d{4}",
  125. # "replace": "XXX-XX-XXXX"
  126. # }
  127. # ]
  128. # }
  129. # Comma separated list of strings representing the host/domain names that the Hue server can serve.
  130. # e.g.: localhost,domain1,*
  131. ## allowed_hosts=*
  132. #poll_enabled=false
  133. # Administrators
  134. # ----------------
  135. [[django_admins]]
  136. ## [[[admin1]]]
  137. ## name=john
  138. ## email=john@doe.com
  139. # UI customizations
  140. # -------------------
  141. [[custom]]
  142. # Top banner HTML code
  143. ## banner_top_html=
  144. # Configuration options for user authentication into the web application
  145. # ------------------------------------------------------------------------
  146. [[auth]]
  147. # Authentication backend. Common settings are:
  148. # - django.contrib.auth.backends.ModelBackend (entirely Django backend)
  149. # - desktop.auth.backend.AllowAllBackend (allows everyone)
  150. # - desktop.auth.backend.AllowFirstUserDjangoBackend
  151. # (Default. Relies on Django and user manager, after the first login)
  152. # - desktop.auth.backend.LdapBackend
  153. # - desktop.auth.backend.PamBackend
  154. # - desktop.auth.backend.SpnegoDjangoBackend
  155. # - desktop.auth.backend.RemoteUserDjangoBackend
  156. # - libsaml.backend.SAML2Backend
  157. # - libopenid.backend.OpenIDBackend
  158. # - liboauth.backend.OAuthBackend
  159. # (New oauth, support Twitter, Facebook, Google+ and Linkedin
  160. ## backend=desktop.auth.backend.AllowFirstUserDjangoBackend
  161. # The service to use when querying PAM.
  162. ## pam_service=login
  163. # When using the desktop.auth.backend.RemoteUserDjangoBackend, this sets
  164. # the normalized name of the header that contains the remote user.
  165. # The HTTP header in the request is converted to a key by converting
  166. # all characters to uppercase, replacing any hyphens with underscores
  167. # and adding an HTTP_ prefix to the name. So, for example, if the header
  168. # is called Remote-User that would be configured as HTTP_REMOTE_USER
  169. #
  170. # Defaults to HTTP_REMOTE_USER
  171. ## remote_user_header=HTTP_REMOTE_USER
  172. # Ignore the case of usernames when searching for existing users.
  173. # Only supported in remoteUserDjangoBackend.
  174. ## ignore_username_case=false
  175. # Ignore the case of usernames when searching for existing users to authenticate with.
  176. # Only supported in remoteUserDjangoBackend.
  177. ## force_username_lowercase=false
  178. # Users will expire after they have not logged in for 'n' amount of seconds.
  179. # A negative number means that users will never expire.
  180. ## expires_after=-1
  181. # Apply 'expires_after' to superusers.
  182. ## expire_superusers=true
  183. # Configuration options for connecting to LDAP and Active Directory
  184. # -------------------------------------------------------------------
  185. [[ldap]]
  186. # The search base for finding users and groups
  187. ## base_dn="DC=mycompany,DC=com"
  188. # URL of the LDAP server
  189. ## ldap_url=ldap://auth.mycompany.com
  190. # A PEM-format file containing certificates for the CA's that
  191. # Hue will trust for authentication over TLS.
  192. # The certificate for the CA that signed the
  193. # LDAP server certificate must be included among these certificates.
  194. # See more here http://www.openldap.org/doc/admin24/tls.html.
  195. ## ldap_cert=
  196. ## use_start_tls=true
  197. # Distinguished name of the user to bind as -- not necessary if the LDAP server
  198. # supports anonymous searches
  199. ## bind_dn="CN=ServiceAccount,DC=mycompany,DC=com"
  200. # Password of the bind user -- not necessary if the LDAP server supports
  201. # anonymous searches
  202. ## bind_password=
  203. # Pattern for searching for usernames -- Use <username> for the parameter
  204. # For use when using LdapBackend for Hue authentication
  205. ## ldap_username_pattern="uid=<username>,ou=People,dc=mycompany,dc=com"
  206. # Create users in Hue when they try to login with their LDAP credentials
  207. # For use when using LdapBackend for Hue authentication
  208. ## create_users_on_login = true
  209. # Synchronize a users groups when they login
  210. ## sync_groups_on_login=false
  211. # Ignore the case of usernames when searching for existing users in Hue.
  212. ## ignore_username_case=false
  213. # Force usernames to lowercase when creating new users from LDAP.
  214. ## force_username_lowercase=false
  215. # Use search bind authentication.
  216. ## search_bind_authentication=true
  217. # Choose which kind of subgrouping to use: nested or suboordinate (deprecated).
  218. ## subgroups=suboordinate
  219. # Define the number of levels to search for nested members.
  220. ## nested_members_search_depth=10
  221. # Whether or not to follow referrals
  222. ## follow_referrals=false
  223. # Enable python-ldap debugging.
  224. ## debug=false
  225. # Sets the debug level within the underlying LDAP C lib.
  226. ## debug_level=255
  227. # Possible values for trace_level are 0 for no logging, 1 for only logging the method calls with arguments,
  228. # 2 for logging the method calls with arguments and the complete results and 9 for also logging the traceback of method calls.
  229. ## trace_level=0
  230. [[[users]]]
  231. # Base filter for searching for users
  232. ## user_filter="objectclass=*"
  233. # The username attribute in the LDAP schema
  234. ## user_name_attr=sAMAccountName
  235. [[[groups]]]
  236. # Base filter for searching for groups
  237. ## group_filter="objectclass=*"
  238. # The username attribute in the LDAP schema
  239. ## group_name_attr=cn
  240. [[[ldap_servers]]]
  241. ## [[[[mycompany]]]]
  242. # The search base for finding users and groups
  243. ## base_dn="DC=mycompany,DC=com"
  244. # URL of the LDAP server
  245. ## ldap_url=ldap://auth.mycompany.com
  246. # A PEM-format file containing certificates for the CA's that
  247. # Hue will trust for authentication over TLS.
  248. # The certificate for the CA that signed the
  249. # LDAP server certificate must be included among these certificates.
  250. # See more here http://www.openldap.org/doc/admin24/tls.html.
  251. ## ldap_cert=
  252. ## use_start_tls=true
  253. # Distinguished name of the user to bind as -- not necessary if the LDAP server
  254. # supports anonymous searches
  255. ## bind_dn="CN=ServiceAccount,DC=mycompany,DC=com"
  256. # Password of the bind user -- not necessary if the LDAP server supports
  257. # anonymous searches
  258. ## bind_password=
  259. # Pattern for searching for usernames -- Use <username> for the parameter
  260. # For use when using LdapBackend for Hue authentication
  261. ## ldap_username_pattern="uid=<username>,ou=People,dc=mycompany,dc=com"
  262. ## Use search bind authentication.
  263. ## search_bind_authentication=true
  264. # Whether or not to follow referrals
  265. ## follow_referrals=false
  266. ## [[[[[users]]]]]
  267. # Base filter for searching for users
  268. ## user_filter="objectclass=Person"
  269. # The username attribute in the LDAP schema
  270. ## user_name_attr=sAMAccountName
  271. ## [[[[[groups]]]]]
  272. # Base filter for searching for groups
  273. ## group_filter="objectclass=groupOfNames"
  274. # The username attribute in the LDAP schema
  275. ## group_name_attr=cn
  276. # Configuration options for specifying the Desktop Database. For more info,
  277. # see http://docs.djangoproject.com/en/1.4/ref/settings/#database-engine
  278. # ------------------------------------------------------------------------
  279. [[database]]
  280. # Database engine is typically one of:
  281. # postgresql_psycopg2, mysql, sqlite3 or oracle.
  282. #
  283. # Note that for sqlite3, 'name', below is a a path to the filename. For other backends, it is the database name.
  284. # Note for Oracle, options={'threaded':true} must be set in order to avoid crashes.
  285. # Note for Oracle, you can use the Oracle Service Name by setting "port=0" and then "name=<host>:<port>/<service_name>".
  286. ## engine=sqlite3
  287. ## host=
  288. ## port=
  289. ## user=
  290. ## password=
  291. ## name=desktop/desktop.db
  292. ## options={}
  293. # Configuration options for specifying the Desktop session.
  294. # For more info, see https://docs.djangoproject.com/en/1.4/topics/http/sessions/
  295. # ------------------------------------------------------------------------
  296. [[session]]
  297. # The cookie containing the users' session ID will expire after this amount of time in seconds.
  298. # Default is 2 weeks.
  299. ## ttl=1209600
  300. # The cookie containing the users' session ID will be secure.
  301. # Should only be enabled with HTTPS.
  302. ## secure=false
  303. # The cookie containing the users' session ID will use the HTTP only flag.
  304. ## http_only=false
  305. # Use session-length cookies. Logs out the user when she closes the browser window.
  306. ## expire_at_browser_close=false
  307. # Configuration options for connecting to an external SMTP server
  308. # ------------------------------------------------------------------------
  309. [[smtp]]
  310. # The SMTP server information for email notification delivery
  311. host=localhost
  312. port=25
  313. user=
  314. password=
  315. # Whether to use a TLS (secure) connection when talking to the SMTP server
  316. tls=no
  317. # Default email address to use for various automated notification from Hue
  318. ## default_from_email=hue@localhost
  319. # Configuration options for Kerberos integration for secured Hadoop clusters
  320. # ------------------------------------------------------------------------
  321. [[kerberos]]
  322. # Path to Hue's Kerberos keytab file
  323. ## hue_keytab=
  324. # Kerberos principal name for Hue
  325. ## hue_principal=hue/hostname.foo.com
  326. # Path to kinit
  327. ## kinit_path=/path/to/kinit
  328. # Configuration options for using OAuthBackend (Core) login
  329. # ------------------------------------------------------------------------
  330. [[oauth]]
  331. # The Consumer key of the application
  332. ## consumer_key=XXXXXXXXXXXXXXXXXXXXX
  333. # The Consumer secret of the application
  334. ## consumer_secret=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  335. # The Request token URL
  336. ## request_token_url=https://api.twitter.com/oauth/request_token
  337. # The Access token URL
  338. ## access_token_url=https://api.twitter.com/oauth/access_token
  339. # The Authorize URL
  340. ## authenticate_url=https://api.twitter.com/oauth/authorize
  341. ###########################################################################
  342. # Settings to configure SAML
  343. ###########################################################################
  344. [libsaml]
  345. # Xmlsec1 binary path. This program should be executable by the user running Hue.
  346. ## xmlsec_binary=/usr/local/bin/xmlsec1
  347. # Entity ID for Hue acting as service provider.
  348. # Can also accept a pattern where '<base_url>' will be replaced with server URL base.
  349. ## entity_id="<base_url>/saml2/metadata/"
  350. # Create users from SSO on login.
  351. ## create_users_on_login=true
  352. # Required attributes to ask for from IdP.
  353. # This requires a comma separated list.
  354. ## required_attributes=uid
  355. # Optional attributes to ask for from IdP.
  356. # This requires a comma separated list.
  357. ## optional_attributes=
  358. # IdP metadata in the form of a file. This is generally an XML file containing metadata that the Identity Provider generates.
  359. ## metadata_file=
  360. # Private key to encrypt metadata with.
  361. ## key_file=
  362. # Signed certificate to send along with encrypted metadata.
  363. ## cert_file=
  364. # A mapping from attributes in the response from the IdP to django user attributes.
  365. ## user_attribute_mapping={'uid':'username'}
  366. # Have Hue initiated authn requests be signed and provide a certificate.
  367. ## authn_requests_signed=false
  368. # Have Hue initiated logout requests be signed and provide a certificate.
  369. ## logout_requests_signed=false
  370. # Username can be sourced from 'attributes' or 'nameid'.
  371. ## username_source=attributes
  372. # Performs the logout or not.
  373. ## logout_enabled=true
  374. ###########################################################################
  375. # Settings to configure OpenId
  376. ###########################################################################
  377. [libopenid]
  378. # (Required) OpenId SSO endpoint url.
  379. ## server_endpoint_url=https://www.google.com/accounts/o8/id
  380. # OpenId 1.1 identity url prefix to be used instead of SSO endpoint url
  381. # This is only supported if you are using an OpenId 1.1 endpoint
  382. ## identity_url_prefix=https://app.onelogin.com/openid/your_company.com/
  383. # Create users from OPENID on login.
  384. ## create_users_on_login=true
  385. # Use email for username
  386. ## use_email_for_username=true
  387. ###########################################################################
  388. # Settings to configure OAuth
  389. ###########################################################################
  390. [liboauth]
  391. # NOTE:
  392. # To work, each of the active (i.e. uncommented) service must have
  393. # applications created on the social network.
  394. # Then the "consumer key" and "consumer secret" must be provided here.
  395. #
  396. # The addresses where to do so are:
  397. # Twitter: https://dev.twitter.com/apps
  398. # Google+ : https://cloud.google.com/
  399. # Facebook: https://developers.facebook.com/apps
  400. # Linkedin: https://www.linkedin.com/secure/developer
  401. #
  402. # Additionnaly, the following must be set in the application settings:
  403. # Twitter: Callback URL (aka Redirect URL) must be set to http://YOUR_HUE_IP_OR_DOMAIN_NAME/oauth/social_login/oauth_authenticated
  404. # Google+ : CONSENT SCREEN must have email address
  405. # Facebook: Sandbox Mode must be DISABLED
  406. # Linkedin: "In OAuth User Agreement", r_emailaddress is REQUIRED
  407. # The Consumer key of the application
  408. ## consumer_key_twitter=
  409. ## consumer_key_google=
  410. ## consumer_key_facebook=
  411. ## consumer_key_linkedin=
  412. # The Consumer secret of the application
  413. ## consumer_secret_twitter=
  414. ## consumer_secret_google=
  415. ## consumer_secret_facebook=
  416. ## consumer_secret_linkedin=
  417. # The Request token URL
  418. ## request_token_url_twitter=https://api.twitter.com/oauth/request_token
  419. ## request_token_url_google=https://accounts.google.com/o/oauth2/auth
  420. ## request_token_url_linkedin=https://www.linkedin.com/uas/oauth2/authorization
  421. ## request_token_url_facebook=https://graph.facebook.com/oauth/authorize
  422. # The Access token URL
  423. ## access_token_url_twitter=https://api.twitter.com/oauth/access_token
  424. ## access_token_url_google=https://accounts.google.com/o/oauth2/token
  425. ## access_token_url_facebook=https://graph.facebook.com/oauth/access_token
  426. ## access_token_url_linkedin=https://api.linkedin.com/uas/oauth2/accessToken
  427. # The Authenticate URL
  428. ## authenticate_url_twitter=https://api.twitter.com/oauth/authorize
  429. ## authenticate_url_google=https://www.googleapis.com/oauth2/v1/userinfo?access_token=
  430. ## authenticate_url_facebook=https://graph.facebook.com/me?access_token=
  431. ## authenticate_url_linkedin=https://api.linkedin.com/v1/people/~:(email-address)?format=json&oauth2_access_token=
  432. # Username Map. Json Hash format.
  433. # Replaces username parts in order to simplify usernames obtained
  434. # Example: {"@sub1.domain.com":"_S1", "@sub2.domain.com":"_S2"}
  435. # converts 'email@sub1.domain.com' to 'email_S1'
  436. ## username_map={}
  437. # Whitelisted domains (only applies to Google OAuth). CSV format.
  438. ## whitelisted_domains_google=
  439. ###########################################################################
  440. # Settings for the RDBMS application
  441. ###########################################################################
  442. [librdbms]
  443. # The RDBMS app can have any number of databases configured in the databases
  444. # section. A database is known by its section name
  445. # (IE sqlite, mysql, psql, and oracle in the list below).
  446. [[databases]]
  447. # sqlite configuration.
  448. ## [[[sqlite]]]
  449. # Name to show in the UI.
  450. ## nice_name=SQLite
  451. # For SQLite, name defines the path to the database.
  452. ## name=/tmp/sqlite.db
  453. # Database backend to use.
  454. ## engine=sqlite
  455. # Database options to send to the server when connecting.
  456. # https://docs.djangoproject.com/en/1.4/ref/databases/
  457. ## options={}
  458. # mysql, oracle, or postgresql configuration.
  459. ## [[[mysql]]]
  460. # Name to show in the UI.
  461. ## nice_name="My SQL DB"
  462. # For MySQL and PostgreSQL, name is the name of the database.
  463. # For Oracle, Name is instance of the Oracle server. For express edition
  464. # this is 'xe' by default.
  465. ## name=mysqldb
  466. # Database backend to use. This can be:
  467. # 1. mysql
  468. # 2. postgresql
  469. # 3. oracle
  470. ## engine=mysql
  471. # IP or hostname of the database to connect to.
  472. ## host=localhost
  473. # Port the database server is listening to. Defaults are:
  474. # 1. MySQL: 3306
  475. # 2. PostgreSQL: 5432
  476. # 3. Oracle Express Edition: 1521
  477. ## port=3306
  478. # Username to authenticate with when connecting to the database.
  479. ## user=example
  480. # Password matching the username to authenticate with when
  481. # connecting to the database.
  482. ## password=example
  483. # Database options to send to the server when connecting.
  484. # https://docs.djangoproject.com/en/1.4/ref/databases/
  485. ## options={}
  486. ###########################################################################
  487. # Settings to configure your Hadoop cluster.
  488. ###########################################################################
  489. [hadoop]
  490. # Configuration for HDFS NameNode
  491. # ------------------------------------------------------------------------
  492. [[hdfs_clusters]]
  493. # HA support by using HttpFs
  494. [[[default]]]
  495. # Enter the filesystem uri
  496. fs_defaultfs=hdfs://localhost:8020
  497. # NameNode logical name.
  498. ## logical_name=
  499. # Use WebHdfs/HttpFs as the communication mechanism.
  500. # Domain should be the NameNode or HttpFs host.
  501. # Default port is 14000 for HttpFs.
  502. ## webhdfs_url=http://localhost:50070/webhdfs/v1
  503. # Change this if your HDFS cluster is Kerberos-secured
  504. ## security_enabled=false
  505. # Default umask for file and directory creation, specified in an octal value.
  506. ## umask=022
  507. # Directory of the Hadoop configuration
  508. ## hadoop_conf_dir=$HADOOP_CONF_DIR when set or '/etc/hadoop/conf'
  509. # Configuration for YARN (MR2)
  510. # ------------------------------------------------------------------------
  511. [[yarn_clusters]]
  512. [[[default]]]
  513. # Enter the host on which you are running the ResourceManager
  514. ## resourcemanager_host=localhost
  515. # The port where the ResourceManager IPC listens on
  516. ## resourcemanager_port=8032
  517. # Whether to submit jobs to this cluster
  518. submit_to=True
  519. # Resource Manager logical name (required for HA)
  520. ## logical_name=
  521. # Change this if your YARN cluster is Kerberos-secured
  522. ## security_enabled=false
  523. # URL of the ResourceManager API
  524. ## resourcemanager_api_url=http://localhost:8088
  525. # URL of the ProxyServer API
  526. ## proxy_api_url=http://localhost:8088
  527. # URL of the HistoryServer API
  528. ## history_server_api_url=http://localhost:19888
  529. # In secure mode (HTTPS), if SSL certificates from YARN Rest APIs
  530. # have to be verified against certificate authority
  531. ## ssl_cert_ca_verify=True
  532. # HA support by specifying multiple clusters
  533. # e.g.
  534. # [[[ha]]]
  535. # Resource Manager logical name (required for HA)
  536. ## logical_name=my-rm-name
  537. # Configuration for MapReduce (MR1)
  538. # ------------------------------------------------------------------------
  539. [[mapred_clusters]]
  540. [[[default]]]
  541. # Enter the host on which you are running the Hadoop JobTracker
  542. ## jobtracker_host=localhost
  543. # The port where the JobTracker IPC listens on
  544. ## jobtracker_port=8021
  545. # JobTracker logical name for HA
  546. ## logical_name=
  547. # Thrift plug-in port for the JobTracker
  548. ## thrift_port=9290
  549. # Whether to submit jobs to this cluster
  550. submit_to=False
  551. # Change this if your MapReduce cluster is Kerberos-secured
  552. ## security_enabled=false
  553. # HA support by specifying multiple clusters
  554. # e.g.
  555. # [[[ha]]]
  556. # Enter the logical name of the JobTrackers
  557. ## logical_name=my-jt-name
  558. ###########################################################################
  559. # Settings to configure the Filebrowser app
  560. ###########################################################################
  561. [filebrowser]
  562. # Location on local filesystem where the uploaded archives are temporary stored.
  563. ## archive_upload_tempdir=/tmp
  564. ###########################################################################
  565. # Settings to configure liboozie
  566. ###########################################################################
  567. [liboozie]
  568. # The URL where the Oozie service runs on. This is required in order for
  569. # users to submit jobs. Empty value disables the config check.
  570. ## oozie_url=http://localhost:11000/oozie
  571. # Requires FQDN in oozie_url if enabled
  572. ## security_enabled=false
  573. # Location on HDFS where the workflows/coordinator are deployed when submitted.
  574. ## remote_deployement_dir=/user/hue/oozie/deployments
  575. ###########################################################################
  576. # Settings to configure the Oozie app
  577. ###########################################################################
  578. [oozie]
  579. # Location on local FS where the examples are stored.
  580. ## local_data_dir=..../examples
  581. # Location on local FS where the data for the examples is stored.
  582. ## sample_data_dir=...thirdparty/sample_data
  583. # Location on HDFS where the oozie examples and workflows are stored.
  584. ## remote_data_dir=/user/hue/oozie/workspaces
  585. # Maximum of Oozie workflows or coodinators to retrieve in one API call.
  586. ## oozie_jobs_count=100
  587. # Use Cron format for defining the frequency of a Coordinator instead of the old frequency number/unit.
  588. ## enable_cron_scheduling=true
  589. ###########################################################################
  590. # Settings to configure Beeswax with Hive
  591. ###########################################################################
  592. [beeswax]
  593. # Host where HiveServer2 is running.
  594. # If Kerberos security is enabled, use fully-qualified domain name (FQDN).
  595. ## hive_server_host=localhost
  596. # Port where HiveServer2 Thrift server runs on.
  597. ## hive_server_port=10000
  598. # Hive configuration directory, where hive-site.xml is located
  599. ## hive_conf_dir=/etc/hive/conf
  600. # Timeout in seconds for thrift calls to Hive service
  601. ## server_conn_timeout=120
  602. # Choose whether to use the old GetLog() thrift call from before Hive 0.14 to retrieve the logs.
  603. # If false, use the FetchResults() thrift call from Hive 1.0 or more instead.
  604. ## use_get_log_api=false
  605. # Set a LIMIT clause when browsing a partitioned table.
  606. # A positive value will be set as the LIMIT. If 0 or negative, do not set any limit.
  607. ## browse_partitioned_table_limit=250
  608. # A limit to the number of rows that can be downloaded from a query.
  609. # A value of -1 means there will be no limit.
  610. # A maximum of 65,000 is applied to XLS downloads.
  611. ## download_row_limit=1000000
  612. # Hue will try to close the Hive query when the user leaves the editor page.
  613. # This will free all the query resources in HiveServer2, but also make its results inaccessible.
  614. ## close_queries=false
  615. # Thrift version to use when communicating with HiveServer2.
  616. ## thrift_version=7
  617. [[ssl]]
  618. # Path to Certificate Authority certificates.
  619. ## cacerts=/etc/hue/cacerts.pem
  620. # Choose whether Hue should validate certificates received from the server.
  621. ## validate=true
  622. ###########################################################################
  623. # Settings to configure Impala
  624. ###########################################################################
  625. [impala]
  626. # Host of the Impala Server (one of the Impalad)
  627. ## server_host=localhost
  628. # Port of the Impala Server
  629. ## server_port=21050
  630. # Kerberos principal
  631. ## impala_principal=impala/hostname.foo.com
  632. # Turn on/off impersonation mechanism when talking to Impala
  633. ## impersonation_enabled=False
  634. # Number of initial rows of a result set to ask Impala to cache in order
  635. # to support re-fetching them for downloading them.
  636. # Set to 0 for disabling the option and backward compatibility.
  637. ## querycache_rows=50000
  638. # Timeout in seconds for thrift calls
  639. ## server_conn_timeout=120
  640. # Hue will try to close the Impala query when the user leaves the editor page.
  641. # This will free all the query resources in Impala, but also make its results inaccessible.
  642. ## close_queries=true
  643. # If QUERY_TIMEOUT_S > 0, the query will be timed out (i.e. cancelled) if Impala does not do any work
  644. # (compute or send back results) for that query within QUERY_TIMEOUT_S seconds.
  645. ## query_timeout_s=600
  646. [[ssl]]
  647. # SSL communication enabled for this server.
  648. ## enabled=false
  649. # Path to Certificate Authority certificates.
  650. ## cacerts=/etc/hue/cacerts.pem
  651. # Choose whether Hue should validate certificates received from the server.
  652. ## validate=true
  653. ###########################################################################
  654. # Settings to configure Pig
  655. ###########################################################################
  656. [pig]
  657. # Location of piggybank.jar on local filesystem.
  658. ## local_sample_dir=/usr/share/hue/apps/pig/examples
  659. # Location piggybank.jar will be copied to in HDFS.
  660. ## remote_data_dir=/user/hue/pig/examples
  661. ###########################################################################
  662. # Settings to configure Sqoop
  663. ###########################################################################
  664. [sqoop]
  665. # For autocompletion, fill out the librdbms section.
  666. # Sqoop server URL
  667. ## server_url=http://localhost:12000/sqoop
  668. ###########################################################################
  669. # Settings to configure Proxy
  670. ###########################################################################
  671. [proxy]
  672. # Comma-separated list of regular expressions,
  673. # which match 'host:port' of requested proxy target.
  674. ## whitelist=(localhost|127\.0\.0\.1):(50030|50070|50060|50075)
  675. # Comma-separated list of regular expressions,
  676. # which match any prefix of 'host:port/path' of requested proxy target.
  677. # This does not support matching GET parameters.
  678. ## blacklist=
  679. ###########################################################################
  680. # Settings to configure HBase Browser
  681. ###########################################################################
  682. [hbase]
  683. # Comma-separated list of HBase Thrift servers for clusters in the format of '(name|host:port)'.
  684. # Use full hostname with security.
  685. # If using Kerberos we assume GSSAPI SASL, not PLAIN.
  686. ## hbase_clusters=(Cluster|localhost:9090)
  687. # HBase configuration directory, where hbase-site.xml is located.
  688. ## hbase_conf_dir=/etc/hbase/conf
  689. # Hard limit of rows or columns per row fetched before truncating.
  690. ## truncate_limit = 500
  691. # 'buffered' is the default of the HBase Thrift Server and supports security.
  692. # 'framed' can be used to chunk up responses,
  693. # which is useful when used in conjunction with the nonblocking server in Thrift.
  694. ## thrift_transport=buffered
  695. ###########################################################################
  696. # Settings to configure Solr Search
  697. ###########################################################################
  698. [search]
  699. # URL of the Solr Server
  700. ## solr_url=http://localhost:8983/solr/
  701. # Requires FQDN in solr_url if enabled
  702. ## security_enabled=false
  703. ## Query sent when no term is entered
  704. ## empty_query=*:*
  705. ###########################################################################
  706. # Settings to configure Solr Indexer
  707. ###########################################################################
  708. [indexer]
  709. # Location of the solrctl binary.
  710. ## solrctl_path=/usr/bin/solrctl
  711. # Zookeeper ensemble.
  712. ## solr_zk_ensemble=localhost:2181/solr
  713. ###########################################################################
  714. # Settings to configure Job Designer
  715. ###########################################################################
  716. [jobsub]
  717. # Location on local FS where examples and template are stored.
  718. ## local_data_dir=..../data
  719. # Location on local FS where sample data is stored
  720. ## sample_data_dir=...thirdparty/sample_data
  721. ###########################################################################
  722. # Settings to configure Job Browser
  723. ###########################################################################
  724. [jobbrowser]
  725. # Share submitted jobs information with all users. If set to false,
  726. # submitted jobs are visible only to the owner and administrators.
  727. ## share_jobs=true
  728. ###########################################################################
  729. # Settings to configure the Zookeeper application.
  730. ###########################################################################
  731. [zookeeper]
  732. [[clusters]]
  733. [[[default]]]
  734. # Zookeeper ensemble. Comma separated list of Host/Port.
  735. # e.g. localhost:2181,localhost:2182,localhost:2183
  736. ## host_ports=localhost:2181
  737. # The URL of the REST contrib service (required for znode browsing).
  738. ## rest_url=http://localhost:9998
  739. # Name of Kerberos principal when using security.
  740. ## principal_name=zookeeper
  741. ###########################################################################
  742. # Settings to configure the Spark application.
  743. ###########################################################################
  744. [spark]
  745. # URL of the REST Spark Job Server.
  746. ## server_url=http://localhost:8090/
  747. # List of available types of snippets
  748. ## languages='[{"name": "Scala", "type": "scala"},{"name": "Python", "type": "python"},{"name": "Impala SQL", "type": "impala"},{"name": "Hive SQL", "type": "hive"},{"name": "Text", "type": "text"}]'
  749. ###########################################################################
  750. # Settings for the User Admin application
  751. ###########################################################################
  752. [useradmin]
  753. # The name of the default user group that users will be a member of
  754. ## default_user_group=default
  755. [[password_policy]]
  756. # Set password policy to all users. The default policy requires password to be at least 8 characters long,
  757. # and contain both uppercase and lowercase letters, numbers, and special characters.
  758. ## is_enabled=false
  759. ## pwd_regex="^(?=.*?[A-Z])(?=(.*[a-z]){1,})(?=(.*[\d]){1,})(?=(.*[\W_]){1,}).{8,}$"
  760. ## pwd_hint="The password must be at least 8 characters long, and must contain both uppercase and lowercase letters, at least one number, and at least one special character."
  761. ## pwd_error_message="The password must be at least 8 characters long, and must contain both uppercase and lowercase letters, at least one number, and at least one special character."
  762. ###########################################################################
  763. # Settings for the Sentry lib
  764. ###########################################################################
  765. [libsentry]
  766. # Hostname or IP of server.
  767. ## hostname=localhost
  768. # Port the sentry service is running on.
  769. ## port=8038
  770. # Sentry configuration directory, where sentry-site.xml is located.
  771. ## sentry_conf_dir=/etc/sentry/conf