pseudo-distributed.ini.tmpl 30 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900
  1. #####################################
  2. # DEVELOPMENT EDITION
  3. #####################################
  4. # Hue configuration file
  5. # ===================================
  6. #
  7. # For complete documentation about the contents of this file, run
  8. # $ <hue_root>/build/env/bin/hue config_help
  9. #
  10. # All .ini files under the current directory are treated equally. Their
  11. # contents are merged to form the Hue configuration, which can
  12. # can be viewed on the Hue at
  13. # http://<hue_host>:<port>/dump_config
  14. ###########################################################################
  15. # General configuration for core Desktop features (authentication, etc)
  16. ###########################################################################
  17. [desktop]
  18. send_dbug_messages=1
  19. # To show database transactions, set database_logging to 1
  20. database_logging=0
  21. # Set this to a random string, the longer the better.
  22. # This is used for secure hashing in the session store.
  23. secret_key=
  24. # Webserver listens on this address and port
  25. http_host=0.0.0.0
  26. http_port=8000
  27. # Time zone name
  28. time_zone=America/Los_Angeles
  29. # Enable or disable Django debug mode
  30. ## django_debug_mode=true
  31. # Enable or disable backtrace for server error
  32. ## http_500_debug_mode=true
  33. # Server email for internal error messages
  34. ## django_server_email='hue@localhost.localdomain'
  35. # Email backend
  36. ## django_email_backend=django.core.mail.backends.smtp.EmailBackend
  37. # Webserver runs as this user
  38. ## server_user=hue
  39. ## server_group=hue
  40. # If set to false, runcpserver will not actually start the web server.
  41. # Used if Apache is being used as a WSGI container.
  42. ## enable_server=yes
  43. # Number of threads used by the CherryPy web server
  44. ## cherrypy_server_threads=10
  45. # Filename of SSL Certificate
  46. ## ssl_certificate=
  47. # Filename of SSL RSA Private Key
  48. ## ssl_private_key=
  49. # List of allowed and disallowed ciphers in cipher list format.
  50. # See http://www.openssl.org/docs/apps/ciphers.html for more information on cipher list format.
  51. ## ssl_cipher_list=DEFAULT:!aNULL:!eNULL:!LOW:!EXPORT:!SSLv2
  52. # LDAP password of the hue user used for LDAP authentications. For example for LDAP Authentication with HiveServer2.
  53. # ldap_password=
  54. # Default encoding for site data
  55. ## default_site_encoding=utf-8
  56. # Help improve Hue with anonymous usage analytics.
  57. # Use Google Analytics to see how many times an application or specific section of an application is used, nothing more.
  58. ## collect_usage=true
  59. # Support for HTTPS termination at the load-balancer level with SECURE_PROXY_SSL_HEADER.
  60. ## secure_proxy_ssl_header=false
  61. # Comma-separated list of Django middleware classes to use.
  62. # See https://docs.djangoproject.com/en/1.4/ref/middleware/ for more details on middlewares in Django.
  63. ## middleware=desktop.auth.backend.LdapSynchronizationBackend
  64. # Comma-separated list of regular expressions, which match the redirect URL.
  65. # For example, to restrict to your local domain and FQDN, the following value can be used:
  66. # ^\/.*$,^http:\/\/www.mydomain.com\/.*$
  67. ## redirect_whitelist=
  68. # Comma separated list of apps to not load at server startup.
  69. # e.g.: pig,zookeeper
  70. ## app_blacklist=
  71. # The directory where to store the auditing logs. Auditing is disable if the value is empty.
  72. # e.g. /var/log/hue/audit.log
  73. ## audit_event_log_dir=
  74. # Size in KB/MB/GB for audit log to rollover.
  75. ## audit_log_max_file_size=100MB
  76. # Administrators
  77. # ----------------
  78. [[django_admins]]
  79. ## [[[admin1]]]
  80. ## name=john
  81. ## email=john@doe.com
  82. # UI customizations
  83. # -------------------
  84. [[custom]]
  85. # Top banner HTML code
  86. ## banner_top_html=
  87. # Configuration options for user authentication into the web application
  88. # ------------------------------------------------------------------------
  89. [[auth]]
  90. # Authentication backend. Common settings are:
  91. # - django.contrib.auth.backends.ModelBackend (entirely Django backend)
  92. # - desktop.auth.backend.AllowAllBackend (allows everyone)
  93. # - desktop.auth.backend.AllowFirstUserDjangoBackend
  94. # (Default. Relies on Django and user manager, after the first login)
  95. # - desktop.auth.backend.LdapBackend
  96. # - desktop.auth.backend.PamBackend
  97. # - desktop.auth.backend.SpnegoDjangoBackend
  98. # - desktop.auth.backend.RemoteUserDjangoBackend
  99. # - libsaml.backend.SAML2Backend
  100. # - libopenid.backend.OpenIDBackend
  101. # - liboauth.backend.OAuthBackend
  102. # (New oauth, support Twitter, Facebook, Google+ and Linkedin
  103. ## backend=desktop.auth.backend.AllowFirstUserDjangoBackend
  104. # The service to use when querying PAM.
  105. ## pam_service=login
  106. # When using the desktop.auth.backend.RemoteUserDjangoBackend, this sets
  107. # the normalized name of the header that contains the remote user.
  108. # The HTTP header in the request is converted to a key by converting
  109. # all characters to uppercase, replacing any hyphens with underscores
  110. # and adding an HTTP_ prefix to the name. So, for example, if the header
  111. # is called Remote-User that would be configured as HTTP_REMOTE_USER
  112. #
  113. # Defaults to HTTP_REMOTE_USER
  114. ## remote_user_header=HTTP_REMOTE_USER
  115. # Ignore the case of usernames when searching for existing users.
  116. # Only supported in remoteUserDjangoBackend.
  117. ## ignore_username_case=false
  118. # Ignore the case of usernames when searching for existing users to authenticate with.
  119. # Only supported in remoteUserDjangoBackend.
  120. ## force_username_lowercase=false
  121. # Users will expire after they have not logged in for 'n' amount of seconds.
  122. # A negative number means that users will never expire.
  123. ## expires_after=-1
  124. # Apply 'expires_after' to superusers.
  125. ## expire_superusers=true
  126. # Configuration options for connecting to LDAP and Active Directory
  127. # -------------------------------------------------------------------
  128. [[ldap]]
  129. # The search base for finding users and groups
  130. ## base_dn="DC=mycompany,DC=com"
  131. # URL of the LDAP server
  132. ## ldap_url=ldap://auth.mycompany.com
  133. # A PEM-format file containing certificates for the CA's that
  134. # Hue will trust for authentication over TLS.
  135. # The certificate for the CA that signed the
  136. # LDAP server certificate must be included among these certificates.
  137. # See more here http://www.openldap.org/doc/admin24/tls.html.
  138. ## ldap_cert=
  139. ## use_start_tls=true
  140. # Distinguished name of the user to bind as -- not necessary if the LDAP server
  141. # supports anonymous searches
  142. ## bind_dn="CN=ServiceAccount,DC=mycompany,DC=com"
  143. # Password of the bind user -- not necessary if the LDAP server supports
  144. # anonymous searches
  145. ## bind_password=
  146. # Pattern for searching for usernames -- Use <username> for the parameter
  147. # For use when using LdapBackend for Hue authentication
  148. ## ldap_username_pattern="uid=<username>,ou=People,dc=mycompany,dc=com"
  149. # Create users in Hue when they try to login with their LDAP credentials
  150. # For use when using LdapBackend for Hue authentication
  151. ## create_users_on_login = true
  152. # Synchronize a users groups when they login
  153. ## sync_groups_on_login=false
  154. # Ignore the case of usernames when searching for existing users in Hue.
  155. ## ignore_username_case=false
  156. # Force usernames to lowercase when creating new users from LDAP.
  157. ## force_username_lowercase=false
  158. # Use search bind authentication.
  159. ## search_bind_authentication=true
  160. # Choose which kind of subgrouping to use: nested or suboordinate (deprecated).
  161. ## subgroups=suboordinate
  162. # Define the number of levels to search for nested members.
  163. ## nested_members_search_depth=10
  164. [[[users]]]
  165. # Base filter for searching for users
  166. ## user_filter="objectclass=*"
  167. # The username attribute in the LDAP schema
  168. ## user_name_attr=sAMAccountName
  169. [[[groups]]]
  170. # Base filter for searching for groups
  171. ## group_filter="objectclass=*"
  172. # The username attribute in the LDAP schema
  173. ## group_name_attr=cn
  174. [[[ldap_servers]]]
  175. ## [[[[mycompany]]]]
  176. # The search base for finding users and groups
  177. ## base_dn="DC=mycompany,DC=com"
  178. # URL of the LDAP server
  179. ## ldap_url=ldap://auth.mycompany.com
  180. # A PEM-format file containing certificates for the CA's that
  181. # Hue will trust for authentication over TLS.
  182. # The certificate for the CA that signed the
  183. # LDAP server certificate must be included among these certificates.
  184. # See more here http://www.openldap.org/doc/admin24/tls.html.
  185. ## ldap_cert=
  186. ## use_start_tls=true
  187. # Distinguished name of the user to bind as -- not necessary if the LDAP server
  188. # supports anonymous searches
  189. ## bind_dn="CN=ServiceAccount,DC=mycompany,DC=com"
  190. # Password of the bind user -- not necessary if the LDAP server supports
  191. # anonymous searches
  192. ## bind_password=
  193. # Pattern for searching for usernames -- Use <username> for the parameter
  194. # For use when using LdapBackend for Hue authentication
  195. ## ldap_username_pattern="uid=<username>,ou=People,dc=mycompany,dc=com"
  196. ## [[[[[users]]]]]
  197. # Base filter for searching for users
  198. ## user_filter="objectclass=Person"
  199. # The username attribute in the LDAP schema
  200. ## user_name_attr=sAMAccountName
  201. ## [[[[[groups]]]]]
  202. # Base filter for searching for groups
  203. ## group_filter="objectclass=groupOfNames"
  204. # The username attribute in the LDAP schema
  205. ## group_name_attr=cn
  206. # Configuration options for specifying the Desktop Database. For more info,
  207. # see http://docs.djangoproject.com/en/1.1/ref/settings/#database-engine
  208. # ------------------------------------------------------------------------
  209. [[database]]
  210. # Database engine is typically one of:
  211. # postgresql_psycopg2, mysql, or sqlite3
  212. #
  213. # Note that for sqlite3, 'name', below is a filename;
  214. # for other backends, it is the database name.
  215. ## engine=sqlite3
  216. ## host=
  217. ## port=
  218. ## user=
  219. ## password=
  220. ## name=desktop/desktop.db
  221. ## options={}
  222. # Configuration options for specifying the Desktop session.
  223. # For more info, see https://docs.djangoproject.com/en/1.4/topics/http/sessions/
  224. # ------------------------------------------------------------------------
  225. [[session]]
  226. # The cookie containing the users' session ID will expire after this amount of time in seconds.
  227. # Default is 2 weeks.
  228. ## ttl=1209600
  229. # The cookie containing the users' session ID will be secure.
  230. # Should only be enabled with HTTPS.
  231. ## secure=false
  232. # The cookie containing the users' session ID will use the HTTP only flag.
  233. ## http_only=false
  234. # Use session-length cookies. Logs out the user when she closes the browser window.
  235. ## expire_at_browser_close=false
  236. # Configuration options for connecting to an external SMTP server
  237. # ------------------------------------------------------------------------
  238. [[smtp]]
  239. # The SMTP server information for email notification delivery
  240. host=localhost
  241. port=25
  242. user=
  243. password=
  244. # Whether to use a TLS (secure) connection when talking to the SMTP server
  245. tls=no
  246. # Default email address to use for various automated notification from Hue
  247. ## default_from_email=hue@localhost
  248. # Configuration options for Kerberos integration for secured Hadoop clusters
  249. # ------------------------------------------------------------------------
  250. [[kerberos]]
  251. # Path to Hue's Kerberos keytab file
  252. ## hue_keytab=
  253. # Kerberos principal name for Hue
  254. ## hue_principal=hue/hostname.foo.com
  255. # Path to kinit
  256. ## kinit_path=/path/to/kinit
  257. # Configuration options for using OAuthBackend (Core) login
  258. # ------------------------------------------------------------------------
  259. [[oauth]]
  260. # The Consumer key of the application
  261. ## consumer_key=XXXXXXXXXXXXXXXXXXXXX
  262. # The Consumer secret of the application
  263. ## consumer_secret=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  264. # The Request token URL
  265. ## request_token_url=https://api.twitter.com/oauth/request_token
  266. # The Access token URL
  267. ## access_token_url=https://api.twitter.com/oauth/access_token
  268. # The Authorize URL
  269. ## authenticate_url=https://api.twitter.com/oauth/authorize
  270. ###########################################################################
  271. # Settings to configure SAML
  272. ###########################################################################
  273. [libsaml]
  274. # Xmlsec1 binary path. This program should be executable by the user running Hue.
  275. ## xmlsec_binary=/usr/local/bin/xmlsec1
  276. # Entity ID for Hue acting as service provider.
  277. # Can also accept a pattern where '<base_url>' will be replaced with server URL base.
  278. ## entity_id="<base_url>/saml2/metadata/"
  279. # Create users from SSO on login.
  280. ## create_users_on_login=true
  281. # Required attributes to ask for from IdP.
  282. # This requires a comma separated list.
  283. ## required_attributes=uid
  284. # Optional attributes to ask for from IdP.
  285. # This requires a comma separated list.
  286. ## optional_attributes=
  287. # IdP metadata in the form of a file. This is generally an XML file containing metadata that the Identity Provider generates.
  288. ## metadata_file=
  289. # Private key to encrypt metadata with.
  290. ## key_file=
  291. # Signed certificate to send along with encrypted metadata.
  292. ## cert_file=
  293. # A mapping from attributes in the response from the IdP to django user attributes.
  294. ## user_attribute_mapping={'uid':'username'}
  295. # Have Hue initiated authn requests be signed and provide a certificate.
  296. ## authn_requests_signed=false
  297. # Have Hue initiated logout requests be signed and provide a certificate.
  298. ## logout_requests_signed=false
  299. # Username can be sourced from 'attributes' or 'nameid'.
  300. ## username_source=attributes
  301. # Performs the logout or not.
  302. ## logout_enabled=true
  303. ###########################################################################
  304. # Settings to configure OPENID
  305. ###########################################################################
  306. [libopenid]
  307. # (Required) OpenId SSO endpoint url.
  308. ## server_endpoint_url=https://www.google.com/accounts/o8/id
  309. # OpenId 1.1 identity url prefix to be used instead of SSO endpoint url
  310. # This is only supported if you are using an OpenId 1.1 endpoint
  311. ## identity_url_prefix=https://app.onelogin.com/openid/your_company.com/
  312. # Create users from OPENID on login.
  313. ## create_users_on_login=true
  314. # Use email for username
  315. ## use_email_for_username=true
  316. ###########################################################################
  317. # Settings to configure OAuth
  318. ###########################################################################
  319. [liboauth]
  320. # NOTE:
  321. # To work, each of the active (i.e. uncommented) service must have
  322. # applications created on the social network.
  323. # Then the "consumer key" and "consumer secret" must be provided here.
  324. #
  325. # The addresses where to do so are:
  326. # Twitter: https://dev.twitter.com/apps
  327. # Google+ : https://cloud.google.com/
  328. # Facebook: https://developers.facebook.com/apps
  329. # Linkedin: https://www.linkedin.com/secure/developer
  330. #
  331. # Additionnaly, the following must be set in the application settings:
  332. # Twitter: Callback URL (aka Redirect URL) must be set to http://YOUR_HUE_IP_OR_DOMAIN_NAME/oauth/social_login/oauth_authenticated
  333. # Google+ : CONSENT SCREEN must have email address
  334. # Facebook: Sandbox Mode must be DISABLED
  335. # Linkedin: "In OAuth User Agreement", r_emailaddress is REQUIRED
  336. # The Consumer key of the application
  337. ## consumer_key_twitter=
  338. ## consumer_key_google=
  339. ## consumer_key_facebook=
  340. ## consumer_key_linkedin=
  341. # The Consumer secret of the application
  342. ## consumer_secret_twitter=
  343. ## consumer_secret_google=
  344. ## consumer_secret_facebook=
  345. ## consumer_secret_linkedin=
  346. # The Request token URL
  347. ## request_token_url_twitter=https://api.twitter.com/oauth/request_token
  348. ## request_token_url_google=https://accounts.google.com/o/oauth2/auth
  349. ## request_token_url_linkedin=https://www.linkedin.com/uas/oauth2/authorization
  350. ## request_token_url_facebook=https://graph.facebook.com/oauth/authorize
  351. # The Access token URL
  352. ## access_token_url_twitter=https://api.twitter.com/oauth/access_token
  353. ## access_token_url_google=https://accounts.google.com/o/oauth2/token
  354. ## access_token_url_facebook=https://graph.facebook.com/oauth/access_token
  355. ## access_token_url_linkedin=https://api.linkedin.com/uas/oauth2/accessToken
  356. # The Authenticate URL
  357. ## authenticate_url_twitter=https://api.twitter.com/oauth/authorize
  358. ## authenticate_url_google=https://www.googleapis.com/oauth2/v1/userinfo?access_token=
  359. ## authenticate_url_facebook=https://graph.facebook.com/me?access_token=
  360. ## authenticate_url_linkedin=https://api.linkedin.com/v1/people/~:(email-address)?format=json&oauth2_access_token=
  361. # Whitelisted domains (only applies to Google OAuth). CSV format.
  362. ## whitelisted_domains_google=
  363. ###########################################################################
  364. # Settings for the RDBMS application
  365. ###########################################################################
  366. [librdbms]
  367. # The RDBMS app can have any number of databases configured in the databases
  368. # section. A database is known by its section name
  369. # (IE sqlite, mysql, psql, and oracle in the list below).
  370. [[databases]]
  371. # sqlite configuration.
  372. ## [[[sqlite]]]
  373. # Name to show in the UI.
  374. ## nice_name=SQLite
  375. # For SQLite, name defines the path to the database.
  376. ## name=/tmp/sqlite.db
  377. # Database backend to use.
  378. ## engine=sqlite
  379. # mysql, oracle, or postgresql configuration.
  380. ## [[[mysql]]]
  381. # Name to show in the UI.
  382. ## nice_name="My SQL DB"
  383. # For MySQL and PostgreSQL, name is the name of the database.
  384. # For Oracle, Name is instance of the Oracle server. For express edition
  385. # this is 'xe' by default.
  386. ## name=mysqldb
  387. # Database backend to use. This can be:
  388. # 1. mysql
  389. # 2. postgresql
  390. # 3. oracle
  391. ## engine=mysql
  392. # IP or hostname of the database to connect to.
  393. ## host=localhost
  394. # Port the database server is listening to. Defaults are:
  395. # 1. MySQL: 3306
  396. # 2. PostgreSQL: 5432
  397. # 3. Oracle Express Edition: 1521
  398. ## port=3306
  399. # Username to authenticate with when connecting to the database.
  400. ## user=example
  401. # Password matching the username to authenticate with when
  402. # connecting to the database.
  403. ## password=example
  404. ###########################################################################
  405. # Settings to configure your Hadoop cluster.
  406. ###########################################################################
  407. [hadoop]
  408. # Configuration for HDFS NameNode
  409. # ------------------------------------------------------------------------
  410. [[hdfs_clusters]]
  411. # HA support by using HttpFs
  412. [[[default]]]
  413. # Enter the filesystem uri
  414. fs_defaultfs=hdfs://localhost:8020
  415. # NameNode logical name.
  416. ## logical_name=
  417. # Use WebHdfs/HttpFs as the communication mechanism.
  418. # Domain should be the NameNode or HttpFs host.
  419. # Default port is 14000 for HttpFs.
  420. ## webhdfs_url=http://localhost:50070/webhdfs/v1
  421. # Change this if your HDFS cluster is Kerberos-secured
  422. ## security_enabled=false
  423. # Settings about this HDFS cluster. If you install HDFS in a
  424. # different location, you need to set the following.
  425. # Defaults to $HADOOP_HDFS_HOME or /usr/lib/hadoop-hdfs
  426. ## hadoop_hdfs_home=/usr/lib/hadoop-hdfs
  427. # Defaults to $HADOOP_BIN or /usr/bin/hadoop
  428. ## hadoop_bin=/usr/bin/hadoop
  429. # Defaults to $HADOOP_CONF_DIR or /etc/hadoop/conf
  430. ## hadoop_conf_dir=/etc/hadoop/conf
  431. # Configuration for YARN (MR2)
  432. # ------------------------------------------------------------------------
  433. [[yarn_clusters]]
  434. [[[default]]]
  435. # Enter the host on which you are running the ResourceManager
  436. ## resourcemanager_host=localhost
  437. # The port where the ResourceManager IPC listens on
  438. ## resourcemanager_port=8032
  439. # Whether to submit jobs to this cluster
  440. submit_to=True
  441. # Change this if your YARN cluster is Kerberos-secured
  442. ## security_enabled=false
  443. # Settings about this MR2 cluster. If you install MR2 in a
  444. # different location, you need to set the following.
  445. # Defaults to $HADOOP_MR2_HOME or /usr/lib/hadoop-mapreduce
  446. ## hadoop_mapred_home=/usr/lib/hadoop-mapreduce
  447. # Defaults to $HADOOP_BIN or /usr/bin/hadoop
  448. ## hadoop_bin=/usr/bin/hadoop
  449. # Defaults to $HADOOP_CONF_DIR or /etc/hadoop/conf
  450. ## hadoop_conf_dir=/etc/hadoop/conf
  451. # URL of the ResourceManager API
  452. ## resourcemanager_api_url=http://localhost:8088
  453. # URL of the ProxyServer API
  454. ## proxy_api_url=http://localhost:8088
  455. # URL of the HistoryServer API
  456. # history_server_api_url=http://localhost:19888
  457. # Configuration for MapReduce (MR1)
  458. # ------------------------------------------------------------------------
  459. [[mapred_clusters]]
  460. [[[default]]]
  461. # Enter the host on which you are running the Hadoop JobTracker
  462. ## jobtracker_host=localhost
  463. # The port where the JobTracker IPC listens on
  464. ## jobtracker_port=8021
  465. # JobTracker logical name.
  466. ## logical_name=
  467. # Thrift plug-in port for the JobTracker
  468. ## thrift_port=9290
  469. # Whether to submit jobs to this cluster
  470. submit_to=False
  471. # Change this if your MapReduce cluster is Kerberos-secured
  472. ## security_enabled=false
  473. # Settings about this MR1 cluster. If you install MR1 in a
  474. # different location, you need to set the following.
  475. # Defaults to $HADOOP_MR1_HOME or /usr/lib/hadoop-0.20-mapreduce
  476. ## hadoop_mapred_home=/usr/lib/hadoop-0.20-mapreduce
  477. # Defaults to $HADOOP_BIN or /usr/bin/hadoop
  478. ## hadoop_bin=/usr/bin/hadoop
  479. # Defaults to $HADOOP_CONF_DIR or /etc/hadoop/conf
  480. ## hadoop_conf_dir=/etc/hadoop/conf
  481. # HA support by specifying multiple clusters
  482. # e.g.
  483. # [[[ha]]]
  484. # Enter the host on which you are running the failover JobTracker
  485. # jobtracker_host=localhost-ha
  486. ###########################################################################
  487. # Settings to configure liboozie
  488. ###########################################################################
  489. [liboozie]
  490. # The URL where the Oozie service runs on. This is required in order for
  491. # users to submit jobs.
  492. ## oozie_url=http://localhost:11000/oozie
  493. # Requires FQDN in oozie_url if enabled
  494. ## security_enabled=false
  495. # Location on HDFS where the workflows/coordinator are deployed when submitted.
  496. ## remote_deployement_dir=/user/hue/oozie/deployments
  497. ###########################################################################
  498. # Settings to configure the Oozie app
  499. ###########################################################################
  500. [oozie]
  501. # Location on local FS where the examples are stored.
  502. ## local_data_dir=..../examples
  503. # Location on local FS where the data for the examples is stored.
  504. ## sample_data_dir=...thirdparty/sample_data
  505. # Location on HDFS where the oozie examples and workflows are stored.
  506. ## remote_data_dir=/user/hue/oozie/workspaces
  507. # Maximum of Oozie workflows or coodinators to retrieve in one API call.
  508. ## oozie_jobs_count=100
  509. # Use Cron format for defining the frequency of a Coordinator instead of the old frequency number/unit.
  510. ## enable_cron_scheduling=true
  511. ###########################################################################
  512. # Settings to configure Beeswax with Hive
  513. ###########################################################################
  514. [beeswax]
  515. # Host where Hive server Thrift daemon is running.
  516. # If Kerberos security is enabled, use fully-qualified domain name (FQDN).
  517. ## hive_server_host=<FQDN of Hive Server>
  518. # Port where HiveServer2 Thrift server runs on.
  519. ## hive_server_port=10000
  520. # Hive configuration directory, where hive-site.xml is located
  521. ## hive_conf_dir=/etc/hive/conf
  522. # Timeout in seconds for thrift calls to Hive service
  523. ## server_conn_timeout=120
  524. # Path to HiveServer2 start script
  525. ## hive_server_bin=/usr/lib/hive/bin/hiveserver2
  526. # Set a LIMIT clause when browsing a partitioned table.
  527. # A positive value will be set as the LIMIT. If 0 or negative, do not set any limit.
  528. ## browse_partitioned_table_limit=250
  529. # A limit to the number of rows that can be downloaded from a query.
  530. # A value of -1 means there will be no limit.
  531. # A maximum of 65,000 is applied to XLS downloads.
  532. ## download_row_limit=1000000
  533. # Hue will try to close the Hive query when the user leaves the editor page.
  534. # This will free all the query resources in HiveServer2, but also make its results inaccessible.
  535. ## close_queries=false
  536. [[ssl]]
  537. # SSL communication enabled for this server.
  538. ## enabled=false
  539. # Path to Certificate Authority certificates.
  540. ## cacerts=/etc/hue/cacerts.pem
  541. # Path to the private key file.
  542. ## key=/etc/hue/key.pem
  543. # Path to the public certificate file.
  544. ## cert=/etc/hue/cert.pem
  545. # Choose whether Hue should validate certificates received from the server.
  546. ## validate=true
  547. ###########################################################################
  548. # Settings to configure Pig
  549. ###########################################################################
  550. [pig]
  551. # Location of piggybank.jar on local filesystem.
  552. ## local_sample_dir=/usr/share/hue/apps/pig/examples
  553. # Location piggybank.jar will be copied to in HDFS.
  554. ## remote_data_dir=/user/hue/pig/examples
  555. ###########################################################################
  556. # Settings to configure Sqoop
  557. ###########################################################################
  558. [sqoop]
  559. # For autocompletion, fill out the librdbms section.
  560. # Sqoop server URL
  561. ## server_url=http://localhost:12000/sqoop
  562. ###########################################################################
  563. # Settings to configure Proxy
  564. ###########################################################################
  565. [proxy]
  566. # Comma-separated list of regular expressions,
  567. # which match 'host:port' of requested proxy target.
  568. ## whitelist=(localhost|127\.0\.0\.1):(50030|50070|50060|50075)
  569. # Comma-separated list of regular expressions,
  570. # which match any prefix of 'host:port/path' of requested proxy target.
  571. # This does not support matching GET parameters.
  572. ## blacklist=
  573. ###########################################################################
  574. # Settings to configure Impala
  575. ###########################################################################
  576. [impala]
  577. # Host of the Impala Server (one of the Impalad)
  578. ## server_host=localhost
  579. # Port of the Impala Server
  580. ## server_port=21050
  581. # Kerberos principal
  582. ## impala_principal=impala/hostname.foo.com
  583. # Turn on/off impersonation mechanism when talking to Impala
  584. ## impersonation_enabled=False
  585. # Number of initial rows of a result set to ask Impala to cache in order
  586. # to support re-fetching them for downloading them.
  587. # Set to 0 for disabling the option and backward compatibility.
  588. ## querycache_rows=50000
  589. # Timeout in seconds for thrift calls
  590. ## server_conn_timeout=120
  591. # Hue will try to close the Impala query when the user leaves the editor page.
  592. # This will free all the query resources in Impala, but also make its results inaccessible.
  593. ## close_queries=true
  594. ###########################################################################
  595. # Settings to configure Hbase
  596. ###########################################################################
  597. [hbase]
  598. # Comma-separated list of HBase Thrift servers for
  599. # clusters in the format of '(name|host:port)'.
  600. ## hbase_clusters=(Cluster|localhost:9090)
  601. # Hard limit of rows or columns per row fetched before truncating.
  602. ## truncate_limit = 500
  603. ###########################################################################
  604. # Settings to configure Solr Search
  605. ###########################################################################
  606. [search]
  607. # URL of the Solr Server
  608. ## solr_url=http://localhost:8983/solr/
  609. # Requires FQDN in solr_url if enabled
  610. ## security_enabled=false
  611. ## Query sent when no term is entered
  612. ## empty_query=*:*
  613. ###########################################################################
  614. # Settings to configure Job Designer
  615. ###########################################################################
  616. [jobsub]
  617. # Location on local FS where examples and template are stored.
  618. ## local_data_dir=..../data
  619. # Location on local FS where sample data is stored
  620. ## sample_data_dir=...thirdparty/sample_data
  621. ###########################################################################
  622. # Settings to configure Job Browser
  623. ###########################################################################
  624. [jobbrowser]
  625. # Share submitted jobs information with all users. If set to false,
  626. # submitted jobs are visible only to the owner and administrators.
  627. ## share_jobs=true
  628. ###########################################################################
  629. # Settings to configure the Zookeeper application.
  630. ###########################################################################
  631. [zookeeper]
  632. [[clusters]]
  633. [[[default]]]
  634. # Zookeeper ensemble. Comma separated list of Host/Port.
  635. # e.g. localhost:2181,localhost:2182,localhost:2183
  636. ## host_ports=localhost:2181
  637. # The URL of the REST contrib service (required for znode browsing)
  638. ## rest_url=http://localhost:9998
  639. ###########################################################################
  640. # Settings to configure the Spark application.
  641. ###########################################################################
  642. [spark]
  643. # URL of the REST Spark Job Server.
  644. ## server_url=http://localhost:8090/
  645. ###########################################################################
  646. # Settings for the User Admin application
  647. ###########################################################################
  648. [useradmin]
  649. # The name of the default user group that users will be a member of
  650. ## default_user_group=default