| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972 |
- #####################################
- # DEVELOPMENT EDITION
- #####################################
- # Hue configuration file
- # ===================================
- #
- # For complete documentation about the contents of this file, run
- # $ <hue_root>/build/env/bin/hue config_help
- #
- # All .ini files under the current directory are treated equally. Their
- # contents are merged to form the Hue configuration, which can
- # can be viewed on the Hue at
- # http://<hue_host>:<port>/dump_config
- ###########################################################################
- # General configuration for core Desktop features (authentication, etc)
- ###########################################################################
- [desktop]
- send_dbug_messages=1
- # To show database transactions, set database_logging to 1
- database_logging=0
- # Set this to a random string, the longer the better.
- # This is used for secure hashing in the session store.
- secret_key=
- # Webserver listens on this address and port
- http_host=0.0.0.0
- http_port=8000
- # Time zone name
- time_zone=America/Los_Angeles
- # Enable or disable Django debug mode
- ## django_debug_mode=true
- # Enable or disable backtrace for server error
- ## http_500_debug_mode=true
- # Enable or disable memory profiling.
- ## memory_profiler=false
- # Server email for internal error messages
- ## django_server_email='hue@localhost.localdomain'
- # Email backend
- ## django_email_backend=django.core.mail.backends.smtp.EmailBackend
- # Webserver runs as this user
- ## server_user=hue
- ## server_group=hue
- # This should be the Hue admin and proxy user
- ## default_user=hue
- # This should be the hadoop cluster admin
- ## default_hdfs_superuser=hdfs
- # If set to false, runcpserver will not actually start the web server.
- # Used if Apache is being used as a WSGI container.
- ## enable_server=yes
- # Number of threads used by the CherryPy web server
- ## cherrypy_server_threads=10
- # Filename of SSL Certificate
- ## ssl_certificate=
- # Filename of SSL RSA Private Key
- ## ssl_private_key=
- # List of allowed and disallowed ciphers in cipher list format.
- # See http://www.openssl.org/docs/apps/ciphers.html for more information on cipher list format.
- ## ssl_cipher_list=DEFAULT:!aNULL:!eNULL:!LOW:!EXPORT:!SSLv2
- # LDAP username and password of the hue user used for LDAP authentications.
- # Set it to use LDAP Authentication with HiveServer2 and Impala.
- ## ldap_username=hue
- ## ldap_password=
- # Default encoding for site data
- ## default_site_encoding=utf-8
- # Help improve Hue with anonymous usage analytics.
- # Use Google Analytics to see how many times an application or specific section of an application is used, nothing more.
- ## collect_usage=true
- # Support for HTTPS termination at the load-balancer level with SECURE_PROXY_SSL_HEADER.
- ## secure_proxy_ssl_header=false
- # Comma-separated list of Django middleware classes to use.
- # See https://docs.djangoproject.com/en/1.4/ref/middleware/ for more details on middlewares in Django.
- ## middleware=desktop.auth.backend.LdapSynchronizationBackend
- # Comma-separated list of regular expressions, which match the redirect URL.
- # For example, to restrict to your local domain and FQDN, the following value can be used:
- # ^\/.*$,^http:\/\/www.mydomain.com\/.*$
- ## redirect_whitelist=
- # Comma separated list of apps to not load at server startup.
- # e.g.: pig,zookeeper
- ## app_blacklist=
- # The directory where to store the auditing logs. Auditing is disable if the value is empty.
- # e.g. /var/log/hue/audit.log
- ## audit_event_log_dir=
- # Size in KB/MB/GB for audit log to rollover.
- ## audit_log_max_file_size=100MB
- #poll_enabled=false
- # Administrators
- # ----------------
- [[django_admins]]
- ## [[[admin1]]]
- ## name=john
- ## email=john@doe.com
- # UI customizations
- # -------------------
- [[custom]]
- # Top banner HTML code
- ## banner_top_html=
- # Configuration options for user authentication into the web application
- # ------------------------------------------------------------------------
- [[auth]]
- # Authentication backend. Common settings are:
- # - django.contrib.auth.backends.ModelBackend (entirely Django backend)
- # - desktop.auth.backend.AllowAllBackend (allows everyone)
- # - desktop.auth.backend.AllowFirstUserDjangoBackend
- # (Default. Relies on Django and user manager, after the first login)
- # - desktop.auth.backend.LdapBackend
- # - desktop.auth.backend.PamBackend
- # - desktop.auth.backend.SpnegoDjangoBackend
- # - desktop.auth.backend.RemoteUserDjangoBackend
- # - libsaml.backend.SAML2Backend
- # - libopenid.backend.OpenIDBackend
- # - liboauth.backend.OAuthBackend
- # (New oauth, support Twitter, Facebook, Google+ and Linkedin
- ## backend=desktop.auth.backend.AllowFirstUserDjangoBackend
- # The service to use when querying PAM.
- ## pam_service=login
- # When using the desktop.auth.backend.RemoteUserDjangoBackend, this sets
- # the normalized name of the header that contains the remote user.
- # The HTTP header in the request is converted to a key by converting
- # all characters to uppercase, replacing any hyphens with underscores
- # and adding an HTTP_ prefix to the name. So, for example, if the header
- # is called Remote-User that would be configured as HTTP_REMOTE_USER
- #
- # Defaults to HTTP_REMOTE_USER
- ## remote_user_header=HTTP_REMOTE_USER
- # Ignore the case of usernames when searching for existing users.
- # Only supported in remoteUserDjangoBackend.
- ## ignore_username_case=false
- # Ignore the case of usernames when searching for existing users to authenticate with.
- # Only supported in remoteUserDjangoBackend.
- ## force_username_lowercase=false
- # Users will expire after they have not logged in for 'n' amount of seconds.
- # A negative number means that users will never expire.
- ## expires_after=-1
- # Apply 'expires_after' to superusers.
- ## expire_superusers=true
- # Configuration options for connecting to LDAP and Active Directory
- # -------------------------------------------------------------------
- [[ldap]]
- # The search base for finding users and groups
- ## base_dn="DC=mycompany,DC=com"
- # URL of the LDAP server
- ## ldap_url=ldap://auth.mycompany.com
- # A PEM-format file containing certificates for the CA's that
- # Hue will trust for authentication over TLS.
- # The certificate for the CA that signed the
- # LDAP server certificate must be included among these certificates.
- # See more here http://www.openldap.org/doc/admin24/tls.html.
- ## ldap_cert=
- ## use_start_tls=true
- # Distinguished name of the user to bind as -- not necessary if the LDAP server
- # supports anonymous searches
- ## bind_dn="CN=ServiceAccount,DC=mycompany,DC=com"
- # Password of the bind user -- not necessary if the LDAP server supports
- # anonymous searches
- ## bind_password=
- # Pattern for searching for usernames -- Use <username> for the parameter
- # For use when using LdapBackend for Hue authentication
- ## ldap_username_pattern="uid=<username>,ou=People,dc=mycompany,dc=com"
- # Create users in Hue when they try to login with their LDAP credentials
- # For use when using LdapBackend for Hue authentication
- ## create_users_on_login = true
- # Synchronize a users groups when they login
- ## sync_groups_on_login=false
- # Ignore the case of usernames when searching for existing users in Hue.
- ## ignore_username_case=false
- # Force usernames to lowercase when creating new users from LDAP.
- ## force_username_lowercase=false
- # Use search bind authentication.
- ## search_bind_authentication=true
- # Choose which kind of subgrouping to use: nested or suboordinate (deprecated).
- ## subgroups=suboordinate
- # Define the number of levels to search for nested members.
- ## nested_members_search_depth=10
- [[[users]]]
- # Base filter for searching for users
- ## user_filter="objectclass=*"
- # The username attribute in the LDAP schema
- ## user_name_attr=sAMAccountName
- [[[groups]]]
- # Base filter for searching for groups
- ## group_filter="objectclass=*"
- # The username attribute in the LDAP schema
- ## group_name_attr=cn
- [[[ldap_servers]]]
- ## [[[[mycompany]]]]
- # The search base for finding users and groups
- ## base_dn="DC=mycompany,DC=com"
- # URL of the LDAP server
- ## ldap_url=ldap://auth.mycompany.com
- # A PEM-format file containing certificates for the CA's that
- # Hue will trust for authentication over TLS.
- # The certificate for the CA that signed the
- # LDAP server certificate must be included among these certificates.
- # See more here http://www.openldap.org/doc/admin24/tls.html.
- ## ldap_cert=
- ## use_start_tls=true
- # Distinguished name of the user to bind as -- not necessary if the LDAP server
- # supports anonymous searches
- ## bind_dn="CN=ServiceAccount,DC=mycompany,DC=com"
- # Password of the bind user -- not necessary if the LDAP server supports
- # anonymous searches
- ## bind_password=
- # Pattern for searching for usernames -- Use <username> for the parameter
- # For use when using LdapBackend for Hue authentication
- ## ldap_username_pattern="uid=<username>,ou=People,dc=mycompany,dc=com"
- ## Use search bind authentication.
- ## search_bind_authentication=true
- ## [[[[[users]]]]]
- # Base filter for searching for users
- ## user_filter="objectclass=Person"
- # The username attribute in the LDAP schema
- ## user_name_attr=sAMAccountName
- ## [[[[[groups]]]]]
- # Base filter for searching for groups
- ## group_filter="objectclass=groupOfNames"
- # The username attribute in the LDAP schema
- ## group_name_attr=cn
- # Configuration options for specifying the Desktop Database. For more info,
- # see http://docs.djangoproject.com/en/1.4/ref/settings/#database-engine
- # ------------------------------------------------------------------------
- [[database]]
- # Database engine is typically one of:
- # postgresql_psycopg2, mysql, sqlite3 or oracle.
- #
- # Note that for sqlite3, 'name', below is a a path to the filename. For other backends, it is the database name.
- # Note for Oracle, options={'threaded':true} must be set in order to avoid crashes.
- # Note for Oracle, you can use the Oracle Service Name by setting "port=0" and then "name=<host>:<port>/<service_name>".
- ## engine=sqlite3
- ## host=
- ## port=
- ## user=
- ## password=
- ## name=desktop/desktop.db
- ## options={}
- # Configuration options for specifying the Desktop session.
- # For more info, see https://docs.djangoproject.com/en/1.4/topics/http/sessions/
- # ------------------------------------------------------------------------
- [[session]]
- # The cookie containing the users' session ID will expire after this amount of time in seconds.
- # Default is 2 weeks.
- ## ttl=1209600
- # The cookie containing the users' session ID will be secure.
- # Should only be enabled with HTTPS.
- ## secure=false
- # The cookie containing the users' session ID will use the HTTP only flag.
- ## http_only=false
- # Use session-length cookies. Logs out the user when she closes the browser window.
- ## expire_at_browser_close=false
- # Configuration options for connecting to an external SMTP server
- # ------------------------------------------------------------------------
- [[smtp]]
- # The SMTP server information for email notification delivery
- host=localhost
- port=25
- user=
- password=
- # Whether to use a TLS (secure) connection when talking to the SMTP server
- tls=no
- # Default email address to use for various automated notification from Hue
- ## default_from_email=hue@localhost
- # Configuration options for Kerberos integration for secured Hadoop clusters
- # ------------------------------------------------------------------------
- [[kerberos]]
- # Path to Hue's Kerberos keytab file
- ## hue_keytab=
- # Kerberos principal name for Hue
- ## hue_principal=hue/hostname.foo.com
- # Path to kinit
- ## kinit_path=/path/to/kinit
- # Configuration options for using OAuthBackend (Core) login
- # ------------------------------------------------------------------------
- [[oauth]]
- # The Consumer key of the application
- ## consumer_key=XXXXXXXXXXXXXXXXXXXXX
- # The Consumer secret of the application
- ## consumer_secret=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
- # The Request token URL
- ## request_token_url=https://api.twitter.com/oauth/request_token
- # The Access token URL
- ## access_token_url=https://api.twitter.com/oauth/access_token
- # The Authorize URL
- ## authenticate_url=https://api.twitter.com/oauth/authorize
- ###########################################################################
- # Settings to configure SAML
- ###########################################################################
- [libsaml]
- # Xmlsec1 binary path. This program should be executable by the user running Hue.
- ## xmlsec_binary=/usr/local/bin/xmlsec1
- # Entity ID for Hue acting as service provider.
- # Can also accept a pattern where '<base_url>' will be replaced with server URL base.
- ## entity_id="<base_url>/saml2/metadata/"
- # Create users from SSO on login.
- ## create_users_on_login=true
- # Required attributes to ask for from IdP.
- # This requires a comma separated list.
- ## required_attributes=uid
- # Optional attributes to ask for from IdP.
- # This requires a comma separated list.
- ## optional_attributes=
- # IdP metadata in the form of a file. This is generally an XML file containing metadata that the Identity Provider generates.
- ## metadata_file=
- # Private key to encrypt metadata with.
- ## key_file=
- # Signed certificate to send along with encrypted metadata.
- ## cert_file=
- # A mapping from attributes in the response from the IdP to django user attributes.
- ## user_attribute_mapping={'uid':'username'}
- # Have Hue initiated authn requests be signed and provide a certificate.
- ## authn_requests_signed=false
- # Have Hue initiated logout requests be signed and provide a certificate.
- ## logout_requests_signed=false
- # Username can be sourced from 'attributes' or 'nameid'.
- ## username_source=attributes
- # Performs the logout or not.
- ## logout_enabled=true
- ###########################################################################
- # Settings to configure OpenId
- ###########################################################################
- [libopenid]
- # (Required) OpenId SSO endpoint url.
- ## server_endpoint_url=https://www.google.com/accounts/o8/id
- # OpenId 1.1 identity url prefix to be used instead of SSO endpoint url
- # This is only supported if you are using an OpenId 1.1 endpoint
- ## identity_url_prefix=https://app.onelogin.com/openid/your_company.com/
- # Create users from OPENID on login.
- ## create_users_on_login=true
- # Use email for username
- ## use_email_for_username=true
- ###########################################################################
- # Settings to configure OAuth
- ###########################################################################
- [liboauth]
- # NOTE:
- # To work, each of the active (i.e. uncommented) service must have
- # applications created on the social network.
- # Then the "consumer key" and "consumer secret" must be provided here.
- #
- # The addresses where to do so are:
- # Twitter: https://dev.twitter.com/apps
- # Google+ : https://cloud.google.com/
- # Facebook: https://developers.facebook.com/apps
- # Linkedin: https://www.linkedin.com/secure/developer
- #
- # Additionnaly, the following must be set in the application settings:
- # Twitter: Callback URL (aka Redirect URL) must be set to http://YOUR_HUE_IP_OR_DOMAIN_NAME/oauth/social_login/oauth_authenticated
- # Google+ : CONSENT SCREEN must have email address
- # Facebook: Sandbox Mode must be DISABLED
- # Linkedin: "In OAuth User Agreement", r_emailaddress is REQUIRED
- # The Consumer key of the application
- ## consumer_key_twitter=
- ## consumer_key_google=
- ## consumer_key_facebook=
- ## consumer_key_linkedin=
- # The Consumer secret of the application
- ## consumer_secret_twitter=
- ## consumer_secret_google=
- ## consumer_secret_facebook=
- ## consumer_secret_linkedin=
- # The Request token URL
- ## request_token_url_twitter=https://api.twitter.com/oauth/request_token
- ## request_token_url_google=https://accounts.google.com/o/oauth2/auth
- ## request_token_url_linkedin=https://www.linkedin.com/uas/oauth2/authorization
- ## request_token_url_facebook=https://graph.facebook.com/oauth/authorize
- # The Access token URL
- ## access_token_url_twitter=https://api.twitter.com/oauth/access_token
- ## access_token_url_google=https://accounts.google.com/o/oauth2/token
- ## access_token_url_facebook=https://graph.facebook.com/oauth/access_token
- ## access_token_url_linkedin=https://api.linkedin.com/uas/oauth2/accessToken
- # The Authenticate URL
- ## authenticate_url_twitter=https://api.twitter.com/oauth/authorize
- ## authenticate_url_google=https://www.googleapis.com/oauth2/v1/userinfo?access_token=
- ## authenticate_url_facebook=https://graph.facebook.com/me?access_token=
- ## authenticate_url_linkedin=https://api.linkedin.com/v1/people/~:(email-address)?format=json&oauth2_access_token=
- # Username Map. Json Hash format.
- # Replaces username parts in order to simplify usernames obtained
- # Example: {"@sub1.domain.com":"_S1", "@sub2.domain.com":"_S2"}
- # converts 'email@sub1.domain.com' to 'email_S1'
- ## username_map={}
- # Whitelisted domains (only applies to Google OAuth). CSV format.
- ## whitelisted_domains_google=
- ###########################################################################
- # Settings for the RDBMS application
- ###########################################################################
- [librdbms]
- # The RDBMS app can have any number of databases configured in the databases
- # section. A database is known by its section name
- # (IE sqlite, mysql, psql, and oracle in the list below).
- [[databases]]
- # sqlite configuration.
- ## [[[sqlite]]]
- # Name to show in the UI.
- ## nice_name=SQLite
- # For SQLite, name defines the path to the database.
- ## name=/tmp/sqlite.db
- # Database backend to use.
- ## engine=sqlite
- # Database options to send to the server when connecting.
- # https://docs.djangoproject.com/en/1.4/ref/databases/
- ## options={}
- # mysql, oracle, or postgresql configuration.
- ## [[[mysql]]]
- # Name to show in the UI.
- ## nice_name="My SQL DB"
- # For MySQL and PostgreSQL, name is the name of the database.
- # For Oracle, Name is instance of the Oracle server. For express edition
- # this is 'xe' by default.
- ## name=mysqldb
- # Database backend to use. This can be:
- # 1. mysql
- # 2. postgresql
- # 3. oracle
- ## engine=mysql
- # IP or hostname of the database to connect to.
- ## host=localhost
- # Port the database server is listening to. Defaults are:
- # 1. MySQL: 3306
- # 2. PostgreSQL: 5432
- # 3. Oracle Express Edition: 1521
- ## port=3306
- # Username to authenticate with when connecting to the database.
- ## user=example
- # Password matching the username to authenticate with when
- # connecting to the database.
- ## password=example
- # Database options to send to the server when connecting.
- # https://docs.djangoproject.com/en/1.4/ref/databases/
- ## options={}
- ###########################################################################
- # Settings to configure your Hadoop cluster.
- ###########################################################################
- [hadoop]
- # Configuration for HDFS NameNode
- # ------------------------------------------------------------------------
- [[hdfs_clusters]]
- # HA support by using HttpFs
- [[[default]]]
- # Enter the filesystem uri
- fs_defaultfs=hdfs://localhost:8020
- # NameNode logical name.
- ## logical_name=
- # Use WebHdfs/HttpFs as the communication mechanism.
- # Domain should be the NameNode or HttpFs host.
- # Default port is 14000 for HttpFs.
- ## webhdfs_url=http://localhost:50070/webhdfs/v1
- # Change this if your HDFS cluster is Kerberos-secured
- ## security_enabled=false
- # Default umask for file and directory creation, specified in an octal value.
- ## umask=022
- # Configuration for YARN (MR2)
- # ------------------------------------------------------------------------
- [[yarn_clusters]]
- [[[default]]]
- # Enter the host on which you are running the ResourceManager
- ## resourcemanager_host=localhost
- # The port where the ResourceManager IPC listens on
- ## resourcemanager_port=8032
- # Whether to submit jobs to this cluster
- submit_to=True
- # Resource Manager logical name (required for HA)
- ## logical_name=
- # Change this if your YARN cluster is Kerberos-secured
- ## security_enabled=false
- # URL of the ResourceManager API
- ## resourcemanager_api_url=http://localhost:8088
- # URL of the ProxyServer API
- ## proxy_api_url=http://localhost:8088
- # URL of the HistoryServer API
- ## history_server_api_url=http://localhost:19888
- # In secure mode (HTTPS), if SSL certificates from Resource Manager's
- # Rest Server have to be verified against certificate authority
- ## ssl_cert_ca_verify=False
- # HA support by specifying multiple clusters
- # e.g.
- # [[[ha]]]
- # Resource Manager logical name (required for HA)
- ## logical_name=my-rm-name
- # Configuration for MapReduce (MR1)
- # ------------------------------------------------------------------------
- [[mapred_clusters]]
- [[[default]]]
- # Enter the host on which you are running the Hadoop JobTracker
- ## jobtracker_host=localhost
- # The port where the JobTracker IPC listens on
- ## jobtracker_port=8021
- # JobTracker logical name for HA
- ## logical_name=
- # Thrift plug-in port for the JobTracker
- ## thrift_port=9290
- # Whether to submit jobs to this cluster
- submit_to=False
- # Change this if your MapReduce cluster is Kerberos-secured
- ## security_enabled=false
- # HA support by specifying multiple clusters
- # e.g.
- # [[[ha]]]
- # Enter the logical name of the JobTrackers
- ## logical_name=my-jt-name
- ###########################################################################
- # Settings to configure the Filebrowser app
- ###########################################################################
- [filebrowser]
- # Location on local filesystem where the uploaded archives are temporary stored.
- ## archive_upload_tempdir=/tmp
- ###########################################################################
- # Settings to configure liboozie
- ###########################################################################
- [liboozie]
- # The URL where the Oozie service runs on. This is required in order for
- # users to submit jobs. Empty value disables the config check.
- ## oozie_url=http://localhost:11000/oozie
- # Requires FQDN in oozie_url if enabled
- ## security_enabled=false
- # Location on HDFS where the workflows/coordinator are deployed when submitted.
- ## remote_deployement_dir=/user/hue/oozie/deployments
- ###########################################################################
- # Settings to configure the Oozie app
- ###########################################################################
- [oozie]
- # Location on local FS where the examples are stored.
- ## local_data_dir=..../examples
- # Location on local FS where the data for the examples is stored.
- ## sample_data_dir=...thirdparty/sample_data
- # Location on HDFS where the oozie examples and workflows are stored.
- ## remote_data_dir=/user/hue/oozie/workspaces
- # Maximum of Oozie workflows or coodinators to retrieve in one API call.
- ## oozie_jobs_count=100
- # Use Cron format for defining the frequency of a Coordinator instead of the old frequency number/unit.
- ## enable_cron_scheduling=true
- ###########################################################################
- # Settings to configure Beeswax with Hive
- ###########################################################################
- [beeswax]
- # Host where HiveServer2 is running.
- # If Kerberos security is enabled, use fully-qualified domain name (FQDN).
- ## hive_server_host=localhost
- # Port where HiveServer2 Thrift server runs on.
- ## hive_server_port=10000
- # Hive configuration directory, where hive-site.xml is located
- ## hive_conf_dir=/etc/hive/conf
- # Timeout in seconds for thrift calls to Hive service
- ## server_conn_timeout=120
- # Choose whether Hue uses the GetLog() thrift call to retrieve Hive logs.
- # If false, Hue will use the FetchResults() thrift call instead.
- ## use_get_log_api=true
- # Set a LIMIT clause when browsing a partitioned table.
- # A positive value will be set as the LIMIT. If 0 or negative, do not set any limit.
- ## browse_partitioned_table_limit=250
- # A limit to the number of rows that can be downloaded from a query.
- # A value of -1 means there will be no limit.
- # A maximum of 65,000 is applied to XLS downloads.
- ## download_row_limit=1000000
- # Hue will try to close the Hive query when the user leaves the editor page.
- # This will free all the query resources in HiveServer2, but also make its results inaccessible.
- ## close_queries=false
- # Thrift version to use when communicating with HiveServer2
- ## thrift_version=5
- [[ssl]]
- # SSL communication enabled for this server.
- ## enabled=false
- # Path to Certificate Authority certificates.
- ## cacerts=/etc/hue/cacerts.pem
- # Path to the private key file.
- ## key=/etc/hue/key.pem
- # Path to the public certificate file.
- ## cert=/etc/hue/cert.pem
- # Choose whether Hue should validate certificates received from the server.
- ## validate=true
- ###########################################################################
- # Settings to configure Pig
- ###########################################################################
- [pig]
- # Location of piggybank.jar on local filesystem.
- ## local_sample_dir=/usr/share/hue/apps/pig/examples
- # Location piggybank.jar will be copied to in HDFS.
- ## remote_data_dir=/user/hue/pig/examples
- ###########################################################################
- # Settings to configure Sqoop
- ###########################################################################
- [sqoop]
- # For autocompletion, fill out the librdbms section.
- # Sqoop server URL
- ## server_url=http://localhost:12000/sqoop
- ###########################################################################
- # Settings to configure Proxy
- ###########################################################################
- [proxy]
- # Comma-separated list of regular expressions,
- # which match 'host:port' of requested proxy target.
- ## whitelist=(localhost|127\.0\.0\.1):(50030|50070|50060|50075)
- # Comma-separated list of regular expressions,
- # which match any prefix of 'host:port/path' of requested proxy target.
- # This does not support matching GET parameters.
- ## blacklist=
- ###########################################################################
- # Settings to configure Impala
- ###########################################################################
- [impala]
- # Host of the Impala Server (one of the Impalad)
- ## server_host=localhost
- # Port of the Impala Server
- ## server_port=21050
- # Kerberos principal
- ## impala_principal=impala/hostname.foo.com
- # Turn on/off impersonation mechanism when talking to Impala
- ## impersonation_enabled=False
- # Number of initial rows of a result set to ask Impala to cache in order
- # to support re-fetching them for downloading them.
- # Set to 0 for disabling the option and backward compatibility.
- ## querycache_rows=50000
- # Timeout in seconds for thrift calls
- ## server_conn_timeout=120
- # Hue will try to close the Impala query when the user leaves the editor page.
- # This will free all the query resources in Impala, but also make its results inaccessible.
- ## close_queries=true
- # If QUERY_TIMEOUT_S > 0, the query will be timed out (i.e. cancelled) if Impala does not do any work
- # (compute or send back results) for that query within QUERY_TIMEOUT_S seconds.
- ## query_timeout_s=600
- ###########################################################################
- # Settings to configure HBase Browser
- ###########################################################################
- [hbase]
- # Comma-separated list of HBase Thrift servers for clusters in the format of '(name|host:port)'.
- # Use full hostname with security.
- ## hbase_clusters=(Cluster|localhost:9090)
- # HBase configuration directory, where hbase-site.xml is located.
- ## hbase_conf_dir=/etc/hbase/conf
- # Hard limit of rows or columns per row fetched before truncating.
- ## truncate_limit = 500
- # 'buffered' is the default of the HBase Thrift Server and supports security.
- # 'framed' can be used to chunk up responses,
- # which is useful when used in conjunction with the nonblocking server in Thrift.
- ## thrift_transport=buffered
- ###########################################################################
- # Settings to configure Solr Search
- ###########################################################################
- [search]
- # URL of the Solr Server
- ## solr_url=http://localhost:8983/solr/
- # Requires FQDN in solr_url if enabled
- ## security_enabled=false
- ## Query sent when no term is entered
- ## empty_query=*:*
- ###########################################################################
- # Settings to configure Solr Indexer
- ###########################################################################
- [indexer]
- # Location of the solrctl binary.
- ## solrctl_path=/usr/bin/solrctl
- # Zookeeper ensemble.
- ## solr_zk_ensemble=localhost:2181/solr
- ###########################################################################
- # Settings to configure Job Designer
- ###########################################################################
- [jobsub]
- # Location on local FS where examples and template are stored.
- ## local_data_dir=..../data
- # Location on local FS where sample data is stored
- ## sample_data_dir=...thirdparty/sample_data
- ###########################################################################
- # Settings to configure Job Browser
- ###########################################################################
- [jobbrowser]
- # Share submitted jobs information with all users. If set to false,
- # submitted jobs are visible only to the owner and administrators.
- ## share_jobs=true
- ###########################################################################
- # Settings to configure the Zookeeper application.
- ###########################################################################
- [zookeeper]
- [[clusters]]
- [[[default]]]
- # Zookeeper ensemble. Comma separated list of Host/Port.
- # e.g. localhost:2181,localhost:2182,localhost:2183
- ## host_ports=localhost:2181
- # The URL of the REST contrib service (required for znode browsing)
- ## rest_url=http://localhost:9998
- ###########################################################################
- # Settings to configure the Spark application.
- ###########################################################################
- [spark]
- # URL of the REST Spark Job Server.
- ## server_url=http://localhost:8090/
- ###########################################################################
- # Settings for the User Admin application
- ###########################################################################
- [useradmin]
- # The name of the default user group that users will be a member of
- ## default_user_group=default
- [[password_policy]]
- # Set password policy to all users. The default policy requires password to be at least 8 characters long,
- # and contain both uppercase and lowercase letters, numbers, and special characters.
- ## is_enabled=false
- ## pwd_regex="^(?=.*?[A-Z])(?=(.*[a-z]){1,})(?=(.*[\d]){1,})(?=(.*[\W_]){1,}).{8,}$"
- ## pwd_hint="The password must be at least 8 characters long, and must contain both uppercase and lowercase letters, at least one number, and at least one special character."
- ## pwd_error_message="The password must be at least 8 characters long, and must contain both uppercase and lowercase letters, at least one number, and at least one special character."
- ###########################################################################
- # Settings for the Sentry lib
- ###########################################################################
- [libsentry]
- # Hostname or IP of server.
- ## hostname=localhost
- # Port the sentry service is running on.
- ## port=8038
- # Sentry configuration directory, where sentry-site.xml is located.
- ## sentry_conf_dir=/etc/sentry/conf
|