pseudo-distributed.ini.tmpl 49 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440
  1. #####################################
  2. # DEVELOPMENT EDITION
  3. #####################################
  4. # Hue configuration file
  5. # ===================================
  6. #
  7. # For complete documentation about the contents of this file, run
  8. # $ <hue_root>/build/env/bin/hue config_help
  9. #
  10. # All .ini files under the current directory are treated equally. Their
  11. # contents are merged to form the Hue configuration, which can
  12. # can be viewed on the Hue at
  13. # http://<hue_host>:<port>/dump_config
  14. ###########################################################################
  15. # General configuration for core Desktop features (authentication, etc)
  16. ###########################################################################
  17. [desktop]
  18. # Set this to a random string, the longer the better.
  19. # This is used for secure hashing in the session store.
  20. secret_key=
  21. # Execute this script to produce the Django secret key. This will be used when
  22. # `secret_key` is not set.
  23. ## secret_key_script=
  24. # Webserver listens on this address and port
  25. http_host=0.0.0.0
  26. http_port=8000
  27. # Time zone name
  28. time_zone=America/Los_Angeles
  29. # Enable or disable Django debug mode.
  30. ## django_debug_mode=true
  31. # Enable or disable database debug mode.
  32. ## database_logging=false
  33. # Whether to send debug messages from JavaScript to the server logs.
  34. send_dbug_messages=true
  35. # Enable or disable backtrace for server error
  36. ## http_500_debug_mode=true
  37. # Enable or disable memory profiling.
  38. ## memory_profiler=false
  39. # Server email for internal error messages
  40. ## django_server_email='hue@localhost.localdomain'
  41. # Email backend
  42. ## django_email_backend=django.core.mail.backends.smtp.EmailBackend
  43. # Webserver runs as this user
  44. ## server_user=hue
  45. ## server_group=hue
  46. # This should be the Hue admin and proxy user
  47. ## default_user=hue
  48. # This should be the hadoop cluster admin
  49. ## default_hdfs_superuser=hdfs
  50. # If set to false, runcpserver will not actually start the web server.
  51. # Used if Apache is being used as a WSGI container.
  52. ## enable_server=yes
  53. # Number of threads used by the CherryPy web server
  54. ## cherrypy_server_threads=40
  55. # Filename of SSL Certificate
  56. ## ssl_certificate=
  57. # Filename of SSL RSA Private Key
  58. ## ssl_private_key=
  59. # Filename of SSL Certificate Chain
  60. ## ssl_certificate_chain=
  61. # SSL certificate password
  62. ## ssl_password=
  63. # Execute this script to produce the SSL password. This will be used when `ssl_password` is not set.
  64. ## ssl_password_script=
  65. # List of allowed and disallowed ciphers in cipher list format.
  66. # See http://www.openssl.org/docs/apps/ciphers.html for more information on
  67. # cipher list format. This list is from
  68. # https://wiki.mozilla.org/Security/Server_Side_TLS v3.7 intermediate
  69. # recommendation, which should be compatible with Firefox 1, Chrome 1, IE 7,
  70. # Opera 5 and Safari 1.
  71. ## ssl_cipher_list=ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA
  72. # Path to default Certificate Authority certificates.
  73. ## ssl_cacerts=/etc/hue/cacerts.pem
  74. # Choose whether Hue should validate certificates received from the server.
  75. ## validate=true
  76. # Default LDAP/PAM/.. username and password of the hue user used for authentications with other services.
  77. # Inactive if password is empty.
  78. # e.g. LDAP pass-through authentication for HiveServer2 or Impala. Apps can override them individually.
  79. ## auth_username=hue
  80. ## auth_password=
  81. # Default encoding for site data
  82. ## default_site_encoding=utf-8
  83. # Help improve Hue with anonymous usage analytics.
  84. # Use Google Analytics to see how many times an application or specific section of an application is used, nothing more.
  85. ## collect_usage=true
  86. # Tile layer server URL for the Leaflet map charts
  87. # Read more on http://leafletjs.com/reference.html#tilelayer
  88. ## leaflet_tile_layer=http://{s}.tile.osm.org/{z}/{x}/{y}.png
  89. # The copyright message for the specified Leaflet maps Tile Layer
  90. ## leaflet_tile_layer_attribution='&copy; <a href="http://osm.org/copyright">OpenStreetMap</a> contributors'
  91. # X-Frame-Options HTTP header value. Use 'DENY' to deny framing completely
  92. ## http_x_frame_options=SAMEORIGIN
  93. # Enable X-Forwarded-Host header if the load balancer requires it.
  94. ## use_x_forwarded_host=false
  95. # Support for HTTPS termination at the load-balancer level with SECURE_PROXY_SSL_HEADER.
  96. ## secure_proxy_ssl_header=false
  97. # Comma-separated list of Django middleware classes to use.
  98. # See https://docs.djangoproject.com/en/1.4/ref/middleware/ for more details on middlewares in Django.
  99. ## middleware=desktop.auth.backend.LdapSynchronizationBackend
  100. # Comma-separated list of regular expressions, which match the redirect URL.
  101. # For example, to restrict to your local domain and FQDN, the following value can be used:
  102. # ^\/.*$,^http:\/\/www.mydomain.com\/.*$
  103. ## redirect_whitelist=^\/.*$
  104. # Comma separated list of apps to not load at server startup.
  105. # e.g.: pig,zookeeper
  106. ## app_blacklist=
  107. # Choose whether to show the new SQL editor.
  108. ## use_new_editor=true
  109. # The directory where to store the auditing logs. Auditing is disable if the value is empty.
  110. # e.g. /var/log/hue/audit.log
  111. ## audit_event_log_dir=
  112. # Size in KB/MB/GB for audit log to rollover.
  113. ## audit_log_max_file_size=100MB
  114. # A json file containing a list of log redaction rules for cleaning sensitive data
  115. # from log files. It is defined as:
  116. #
  117. # {
  118. # "version": 1,
  119. # "rules": [
  120. # {
  121. # "description": "This is the first rule",
  122. # "trigger": "triggerstring 1",
  123. # "search": "regex 1",
  124. # "replace": "replace 1"
  125. # },
  126. # {
  127. # "description": "This is the second rule",
  128. # "trigger": "triggerstring 2",
  129. # "search": "regex 2",
  130. # "replace": "replace 2"
  131. # }
  132. # ]
  133. # }
  134. #
  135. # Redaction works by searching a string for the [TRIGGER] string. If found,
  136. # the [REGEX] is used to replace sensitive information with the
  137. # [REDACTION_MASK]. If specified with `log_redaction_string`, the
  138. # `log_redaction_string` rules will be executed after the
  139. # `log_redaction_file` rules.
  140. #
  141. # For example, here is a file that would redact passwords and social security numbers:
  142. # {
  143. # "version": 1,
  144. # "rules": [
  145. # {
  146. # "description": "Redact passwords",
  147. # "trigger": "password",
  148. # "search": "password=\".*\"",
  149. # "replace": "password=\"???\""
  150. # },
  151. # {
  152. # "description": "Redact social security numbers",
  153. # "trigger": "",
  154. # "search": "\d{3}-\d{2}-\d{4}",
  155. # "replace": "XXX-XX-XXXX"
  156. # }
  157. # ]
  158. # }
  159. ## log_redaction_file=
  160. # Comma separated list of strings representing the host/domain names that the Hue server can serve.
  161. # e.g.: localhost,domain1,*
  162. ## allowed_hosts=*
  163. # Administrators
  164. # ----------------
  165. [[django_admins]]
  166. ## [[[admin1]]]
  167. ## name=john
  168. ## email=john@doe.com
  169. # UI customizations
  170. # -------------------
  171. [[custom]]
  172. # Top banner HTML code
  173. # e.g. <H4>Test Lab A2 Hue Services</H4>
  174. ## banner_top_html=
  175. # Login splash HTML code
  176. # e.g. WARNING: You are required to have authorization before you proceed
  177. ## login_splash_html=
  178. # Cache timeout in milliseconds for the assist, autocomplete, etc.
  179. # defaults to 86400000 (1 day), set to 0 to disable caching
  180. ## cacheable_ttl=86400000
  181. # Configuration options for user authentication into the web application
  182. # ------------------------------------------------------------------------
  183. [[auth]]
  184. # Authentication backend. Common settings are:
  185. # - django.contrib.auth.backends.ModelBackend (entirely Django backend)
  186. # - desktop.auth.backend.AllowAllBackend (allows everyone)
  187. # - desktop.auth.backend.AllowFirstUserDjangoBackend
  188. # (Default. Relies on Django and user manager, after the first login)
  189. # - desktop.auth.backend.LdapBackend
  190. # - desktop.auth.backend.PamBackend
  191. # - desktop.auth.backend.SpnegoDjangoBackend
  192. # - desktop.auth.backend.RemoteUserDjangoBackend
  193. # - libsaml.backend.SAML2Backend
  194. # - libopenid.backend.OpenIDBackend
  195. # - liboauth.backend.OAuthBackend
  196. # (New oauth, support Twitter, Facebook, Google+ and Linkedin
  197. # Multiple Authentication backends are supported by specifying a comma-separated list in order of priority.
  198. # However, in order to enable OAuthBackend, it must be the ONLY backend configured.
  199. ## backend=desktop.auth.backend.AllowFirstUserDjangoBackend
  200. # Class which defines extra accessor methods for User objects.
  201. ## user_aug=desktop.auth.backend.DefaultUserAugmentor
  202. # The service to use when querying PAM.
  203. ## pam_service=login
  204. # When using the desktop.auth.backend.RemoteUserDjangoBackend, this sets
  205. # the normalized name of the header that contains the remote user.
  206. # The HTTP header in the request is converted to a key by converting
  207. # all characters to uppercase, replacing any hyphens with underscores
  208. # and adding an HTTP_ prefix to the name. So, for example, if the header
  209. # is called Remote-User that would be configured as HTTP_REMOTE_USER
  210. #
  211. # Defaults to HTTP_REMOTE_USER
  212. ## remote_user_header=HTTP_REMOTE_USER
  213. # Ignore the case of usernames when searching for existing users.
  214. # Supported in remoteUserDjangoBackend and SpnegoDjangoBackend
  215. ## ignore_username_case=true
  216. # Forcibly cast usernames to lowercase, takes precedence over force_username_uppercase
  217. # Supported in remoteUserDjangoBackend and SpnegoDjangoBackend
  218. ## force_username_lowercase=true
  219. # Forcibly cast usernames to uppercase, cannot be combined with force_username_lowercase
  220. ## force_username_uppercase=false
  221. # Users will expire after they have not logged in for 'n' amount of seconds.
  222. # A negative number means that users will never expire.
  223. ## expires_after=-1
  224. # Apply 'expires_after' to superusers.
  225. ## expire_superusers=true
  226. # Users will automatically be logged out after 'n' seconds of inactivity.
  227. # A negative number means that idle sessions will not be timed out.
  228. idle_session_timeout=-1
  229. # Force users to change password on first login with desktop.auth.backend.AllowFirstUserDjangoBackend
  230. ## change_default_password=false
  231. # Number of login attempts allowed before a record is created for failed logins
  232. ## login_failure_limit=3
  233. # After number of allowed login attempts are exceeded, do we lock out this IP and optionally user agent?
  234. ## login_lock_out_at_failure=false
  235. # If set, defines period of inactivity in seconds after which failed logins will be forgotten
  236. ## login_cooloff_time=60
  237. # If True, lock out based on IP and browser user agent
  238. ## login_lock_out_by_combination_browser_user_agent_and_ip=false
  239. # If True, lock out based on IP and user
  240. ## login_lock_out_by_combination_user_and_ip=false
  241. # Configuration options for connecting to LDAP and Active Directory
  242. # -------------------------------------------------------------------
  243. [[ldap]]
  244. # The search base for finding users and groups
  245. ## base_dn="DC=mycompany,DC=com"
  246. # URL of the LDAP server
  247. ## ldap_url=ldap://auth.mycompany.com
  248. # The NT domain used for LDAP authentication
  249. ## nt_domain=mycompany.com
  250. # A PEM-format file containing certificates for the CA's that
  251. # Hue will trust for authentication over TLS.
  252. # The certificate for the CA that signed the
  253. # LDAP server certificate must be included among these certificates.
  254. # See more here http://www.openldap.org/doc/admin24/tls.html.
  255. ## ldap_cert=
  256. ## use_start_tls=true
  257. # Distinguished name of the user to bind as -- not necessary if the LDAP server
  258. # supports anonymous searches
  259. ## bind_dn="CN=ServiceAccount,DC=mycompany,DC=com"
  260. # Password of the bind user -- not necessary if the LDAP server supports
  261. # anonymous searches
  262. ## bind_password=
  263. # Execute this script to produce the bind user password. This will be used
  264. # when `bind_password` is not set.
  265. ## bind_password_script=
  266. # Pattern for searching for usernames -- Use <username> for the parameter
  267. # For use when using LdapBackend for Hue authentication
  268. ## ldap_username_pattern="uid=<username>,ou=People,dc=mycompany,dc=com"
  269. # Create users in Hue when they try to login with their LDAP credentials
  270. # For use when using LdapBackend for Hue authentication
  271. ## create_users_on_login = true
  272. # Synchronize a users groups when they login
  273. ## sync_groups_on_login=false
  274. # Ignore the case of usernames when searching for existing users in Hue.
  275. ## ignore_username_case=true
  276. # Force usernames to lowercase when creating new users from LDAP.
  277. # Takes precedence over force_username_uppercase
  278. ## force_username_lowercase=true
  279. # Force usernames to uppercase, cannot be combined with force_username_lowercase
  280. ## force_username_uppercase=false
  281. # Use search bind authentication.
  282. ## search_bind_authentication=true
  283. # Choose which kind of subgrouping to use: nested or suboordinate (deprecated).
  284. ## subgroups=suboordinate
  285. # Define the number of levels to search for nested members.
  286. ## nested_members_search_depth=10
  287. # Whether or not to follow referrals
  288. ## follow_referrals=false
  289. # Enable python-ldap debugging.
  290. ## debug=false
  291. # Sets the debug level within the underlying LDAP C lib.
  292. ## debug_level=255
  293. # Possible values for trace_level are 0 for no logging, 1 for only logging the method calls with arguments,
  294. # 2 for logging the method calls with arguments and the complete results and 9 for also logging the traceback of method calls.
  295. ## trace_level=0
  296. [[[users]]]
  297. # Base filter for searching for users
  298. ## user_filter="objectclass=*"
  299. # The username attribute in the LDAP schema
  300. ## user_name_attr=sAMAccountName
  301. [[[groups]]]
  302. # Base filter for searching for groups
  303. ## group_filter="objectclass=*"
  304. # The group name attribute in the LDAP schema
  305. ## group_name_attr=cn
  306. # The attribute of the group object which identifies the members of the group
  307. ## group_member_attr=members
  308. [[[ldap_servers]]]
  309. ## [[[[mycompany]]]]
  310. # The search base for finding users and groups
  311. ## base_dn="DC=mycompany,DC=com"
  312. # URL of the LDAP server
  313. ## ldap_url=ldap://auth.mycompany.com
  314. # The NT domain used for LDAP authentication
  315. ## nt_domain=mycompany.com
  316. # A PEM-format file containing certificates for the CA's that
  317. # Hue will trust for authentication over TLS.
  318. # The certificate for the CA that signed the
  319. # LDAP server certificate must be included among these certificates.
  320. # See more here http://www.openldap.org/doc/admin24/tls.html.
  321. ## ldap_cert=
  322. ## use_start_tls=true
  323. # Distinguished name of the user to bind as -- not necessary if the LDAP server
  324. # supports anonymous searches
  325. ## bind_dn="CN=ServiceAccount,DC=mycompany,DC=com"
  326. # Password of the bind user -- not necessary if the LDAP server supports
  327. # anonymous searches
  328. ## bind_password=
  329. # Execute this script to produce the bind user password. This will be used
  330. # when `bind_password` is not set.
  331. ## bind_password_script=
  332. # Pattern for searching for usernames -- Use <username> for the parameter
  333. # For use when using LdapBackend for Hue authentication
  334. ## ldap_username_pattern="uid=<username>,ou=People,dc=mycompany,dc=com"
  335. ## Use search bind authentication.
  336. ## search_bind_authentication=true
  337. # Whether or not to follow referrals
  338. ## follow_referrals=false
  339. # Enable python-ldap debugging.
  340. ## debug=false
  341. # Sets the debug level within the underlying LDAP C lib.
  342. ## debug_level=255
  343. # Possible values for trace_level are 0 for no logging, 1 for only logging the method calls with arguments,
  344. # 2 for logging the method calls with arguments and the complete results and 9 for also logging the traceback of method calls.
  345. ## trace_level=0
  346. ## [[[[[users]]]]]
  347. # Base filter for searching for users
  348. ## user_filter="objectclass=Person"
  349. # The username attribute in the LDAP schema
  350. ## user_name_attr=sAMAccountName
  351. ## [[[[[groups]]]]]
  352. # Base filter for searching for groups
  353. ## group_filter="objectclass=groupOfNames"
  354. # The username attribute in the LDAP schema
  355. ## group_name_attr=cn
  356. # Configuration options for specifying the Desktop Database. For more info,
  357. # see http://docs.djangoproject.com/en/1.4/ref/settings/#database-engine
  358. # ------------------------------------------------------------------------
  359. [[database]]
  360. # Database engine is typically one of:
  361. # postgresql_psycopg2, mysql, sqlite3 or oracle.
  362. #
  363. # Note that for sqlite3, 'name', below is a path to the filename. For other backends, it is the database name.
  364. # Note for Oracle, options={"threaded":true} must be set in order to avoid crashes.
  365. # Note for Oracle, you can use the Oracle Service Name by setting "port=0" and then "name=<host>:<port>/<service_name>".
  366. # Note for MariaDB use the 'mysql' engine.
  367. ## engine=sqlite3
  368. ## host=
  369. ## port=
  370. ## user=
  371. ## password=
  372. ## name=desktop/desktop.db
  373. ## options={}
  374. # Configuration options for specifying the Desktop session.
  375. # For more info, see https://docs.djangoproject.com/en/1.4/topics/http/sessions/
  376. # ------------------------------------------------------------------------
  377. [[session]]
  378. # The cookie containing the users' session ID will expire after this amount of time in seconds.
  379. # Default is 2 weeks.
  380. ## ttl=1209600
  381. # The cookie containing the users' session ID will be secure.
  382. # Should only be enabled with HTTPS.
  383. ## secure=false
  384. # The cookie containing the users' session ID will use the HTTP only flag.
  385. ## http_only=true
  386. # Use session-length cookies. Logs out the user when she closes the browser window.
  387. ## expire_at_browser_close=false
  388. # Configuration options for connecting to an external SMTP server
  389. # ------------------------------------------------------------------------
  390. [[smtp]]
  391. # The SMTP server information for email notification delivery
  392. host=localhost
  393. port=25
  394. user=
  395. password=
  396. # Whether to use a TLS (secure) connection when talking to the SMTP server
  397. tls=no
  398. # Default email address to use for various automated notification from Hue
  399. ## default_from_email=hue@localhost
  400. # Configuration options for Kerberos integration for secured Hadoop clusters
  401. # ------------------------------------------------------------------------
  402. [[kerberos]]
  403. # Path to Hue's Kerberos keytab file
  404. ## hue_keytab=
  405. # Kerberos principal name for Hue
  406. ## hue_principal=hue/hostname.foo.com
  407. # Path to kinit
  408. ## kinit_path=/path/to/kinit
  409. # Configuration options for using OAuthBackend (Core) login
  410. # ------------------------------------------------------------------------
  411. [[oauth]]
  412. # The Consumer key of the application
  413. ## consumer_key=XXXXXXXXXXXXXXXXXXXXX
  414. # The Consumer secret of the application
  415. ## consumer_secret=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  416. # The Request token URL
  417. ## request_token_url=https://api.twitter.com/oauth/request_token
  418. # The Access token URL
  419. ## access_token_url=https://api.twitter.com/oauth/access_token
  420. # The Authorize URL
  421. ## authenticate_url=https://api.twitter.com/oauth/authorize
  422. # Configuration options for Metrics
  423. # ------------------------------------------------------------------------
  424. [[metrics]]
  425. # Enable the metrics URL "/desktop/metrics"
  426. ## enable_web_metrics=True
  427. # If specified, Hue will write metrics to this file.
  428. ## location=/var/log/hue/metrics.json
  429. # Time in milliseconds on how frequently to collect metrics
  430. ## collection_interval=30000
  431. ###########################################################################
  432. # Settings to configure the snippets available in the Notebook
  433. ###########################################################################
  434. [notebook]
  435. ## Show the notebook menu or not
  436. # show_notebooks=true
  437. ## Base URL to Remote GitHub Server
  438. # github_remote_url=https://github.com
  439. ## Base URL to GitHub API
  440. # github_api_url=https://api.github.com
  441. ## Client ID for Authorized GitHub Application
  442. # github_client_id=
  443. ## Client Secret for Authorized GitHub Application
  444. # github_client_secret=
  445. # One entry for each type of snippet. The first 5 will appear in the wheel.
  446. [[interpreters]]
  447. # Define the name and how to connect and execute the language.
  448. [[[hive]]]
  449. # The name of the snippet.
  450. name=Hive
  451. # The backend connection to use to communicate with the server.
  452. interface=hiveserver2
  453. [[[impala]]]
  454. name=Impala
  455. interface=hiveserver2
  456. # [[[sparksql]]]
  457. # name=SparkSql
  458. # interface=hiveserver2
  459. [[[spark]]]
  460. name=Scala
  461. interface=livy
  462. [[[pyspark]]]
  463. name=PySpark
  464. interface=livy
  465. [[[r]]]
  466. name=R
  467. interface=livy
  468. [[[jar]]]
  469. name=Spark Submit Jar
  470. interface=livy-batch
  471. [[[py]]]
  472. name=Spark Submit Python
  473. interface=livy-batch
  474. [[[pig]]]
  475. name=Pig
  476. interface=pig
  477. [[[text]]]
  478. name=Text
  479. interface=text
  480. [[[markdown]]]
  481. name=Markdown
  482. interface=text
  483. [[[mysql]]]
  484. name = MySQL
  485. interface=rdbms
  486. [[[sqlite]]]
  487. name = SQLite
  488. interface=rdbms
  489. [[[postgresql]]]
  490. name = PostgreSQL
  491. interface=rdbms
  492. [[[oracle]]]
  493. name = Oracle
  494. interface=rdbms
  495. # [[[mysql]]]
  496. # name=MySql JDBC
  497. # interface=jdbc
  498. # ## Specific options for connecting to the server.
  499. # ## The JDBC connectors, e.g. mysql.jar, need to be in the CLASSPATH environment variable.
  500. # ## If 'user' and 'password' are omitted, they will be prompted in the UI.
  501. # options='{"url": "jdbc:mysql://localhost:3306/hue", "driver": "com.mysql.jdbc.Driver", "user": "root", "password": "root"}'
  502. ## Main flag to override the automatic starting of the DBProxy server.
  503. # enable_dbproxy_server=true
  504. ###########################################################################
  505. # Settings to configure your Hadoop cluster.
  506. ###########################################################################
  507. [hadoop]
  508. # Configuration for HDFS NameNode
  509. # ------------------------------------------------------------------------
  510. [[hdfs_clusters]]
  511. # HA support by using HttpFs
  512. [[[default]]]
  513. # Enter the filesystem uri
  514. fs_defaultfs=hdfs://localhost:8020
  515. # NameNode logical name.
  516. ## logical_name=
  517. # Use WebHdfs/HttpFs as the communication mechanism.
  518. # Domain should be the NameNode or HttpFs host.
  519. # Default port is 14000 for HttpFs.
  520. ## webhdfs_url=http://localhost:50070/webhdfs/v1
  521. # Change this if your HDFS cluster is Kerberos-secured
  522. ## security_enabled=false
  523. # In secure mode (HTTPS), if SSL certificates from YARN Rest APIs
  524. # have to be verified against certificate authority
  525. ## ssl_cert_ca_verify=True
  526. # Directory of the Hadoop configuration
  527. ## hadoop_conf_dir=$HADOOP_CONF_DIR when set or '/etc/hadoop/conf'
  528. # Configuration for YARN (MR2)
  529. # ------------------------------------------------------------------------
  530. [[yarn_clusters]]
  531. [[[default]]]
  532. # Enter the host on which you are running the ResourceManager
  533. ## resourcemanager_host=localhost
  534. # The port where the ResourceManager IPC listens on
  535. ## resourcemanager_port=8032
  536. # Whether to submit jobs to this cluster
  537. submit_to=True
  538. # Resource Manager logical name (required for HA)
  539. ## logical_name=
  540. # Change this if your YARN cluster is Kerberos-secured
  541. ## security_enabled=false
  542. # URL of the ResourceManager API
  543. ## resourcemanager_api_url=http://localhost:8088
  544. # URL of the ProxyServer API
  545. ## proxy_api_url=http://localhost:8088
  546. # URL of the HistoryServer API
  547. ## history_server_api_url=http://localhost:19888
  548. # URL of the Spark History Server
  549. ## spark_history_server_url=http://localhost:18088
  550. # In secure mode (HTTPS), if SSL certificates from YARN Rest APIs
  551. # have to be verified against certificate authority
  552. ## ssl_cert_ca_verify=True
  553. # HA support by specifying multiple clusters.
  554. # Redefine different properties there.
  555. # e.g.
  556. # [[[ha]]]
  557. # Resource Manager logical name (required for HA)
  558. ## logical_name=my-rm-name
  559. # Un-comment to enable
  560. ## submit_to=True
  561. # URL of the ResourceManager API
  562. ## resourcemanager_api_url=http://localhost:8088
  563. # ...
  564. # Configuration for MapReduce (MR1)
  565. # ------------------------------------------------------------------------
  566. [[mapred_clusters]]
  567. [[[default]]]
  568. # Enter the host on which you are running the Hadoop JobTracker
  569. ## jobtracker_host=localhost
  570. # The port where the JobTracker IPC listens on
  571. ## jobtracker_port=8021
  572. # JobTracker logical name for HA
  573. ## logical_name=
  574. # Thrift plug-in port for the JobTracker
  575. ## thrift_port=9290
  576. # Whether to submit jobs to this cluster
  577. submit_to=False
  578. # Change this if your MapReduce cluster is Kerberos-secured
  579. ## security_enabled=false
  580. # HA support by specifying multiple clusters
  581. # e.g.
  582. # [[[ha]]]
  583. # Enter the logical name of the JobTrackers
  584. ## logical_name=my-jt-name
  585. ###########################################################################
  586. # Settings to configure Beeswax with Hive
  587. ###########################################################################
  588. [beeswax]
  589. # Host where HiveServer2 is running.
  590. # If Kerberos security is enabled, use fully-qualified domain name (FQDN).
  591. ## hive_server_host=localhost
  592. # Port where HiveServer2 Thrift server runs on.
  593. ## hive_server_port=10000
  594. # Hive configuration directory, where hive-site.xml is located
  595. ## hive_conf_dir=/etc/hive/conf
  596. # Timeout in seconds for thrift calls to Hive service
  597. ## server_conn_timeout=120
  598. # Choose whether to use the old GetLog() thrift call from before Hive 0.14 to retrieve the logs.
  599. # If false, use the FetchResults() thrift call from Hive 1.0 or more instead.
  600. ## use_get_log_api=false
  601. # Limit the number of partitions that can be listed.
  602. ## list_partitions_limit=10000
  603. # The maximum number of partitions that will be included in the SELECT * LIMIT sample query for partitioned tables.
  604. ## query_partitions_limit=10
  605. # A limit to the number of cells (rows * columns) that can be downloaded from a query
  606. # (e.g. - 10K rows * 1K columns = 10M cells.)
  607. # A value of -1 means there will be no limit.
  608. ## download_cell_limit=10000000
  609. # Hue will try to close the Hive query when the user leaves the editor page.
  610. # This will free all the query resources in HiveServer2, but also make its results inaccessible.
  611. ## close_queries=false
  612. # Thrift version to use when communicating with HiveServer2.
  613. # New column format is from version 7.
  614. ## thrift_version=7
  615. # A comma-separated list of white-listed Hive configuration properties that users are authorized to set.
  616. # config_whitelist=hive.map.aggr,hive.exec.compress.output,hive.exec.parallel,hive.execution.engine,mapreduce.job.queuename
  617. # Override the default desktop username and password of the hue user used for authentications with other services.
  618. # e.g. Used for LDAP/PAM pass-through authentication.
  619. ## auth_username=hue
  620. ## auth_password=
  621. [[ssl]]
  622. # Path to Certificate Authority certificates.
  623. ## cacerts=/etc/hue/cacerts.pem
  624. # Choose whether Hue should validate certificates received from the server.
  625. ## validate=true
  626. ###########################################################################
  627. # Settings to configure Impala
  628. ###########################################################################
  629. [impala]
  630. # Host of the Impala Server (one of the Impalad)
  631. ## server_host=localhost
  632. # Port of the Impala Server
  633. ## server_port=21050
  634. # Kerberos principal
  635. ## impala_principal=impala/hostname.foo.com
  636. # Turn on/off impersonation mechanism when talking to Impala
  637. ## impersonation_enabled=False
  638. # Number of initial rows of a result set to ask Impala to cache in order
  639. # to support re-fetching them for downloading them.
  640. # Set to 0 for disabling the option and backward compatibility.
  641. ## querycache_rows=50000
  642. # Timeout in seconds for thrift calls
  643. ## server_conn_timeout=120
  644. # Hue will try to close the Impala query when the user leaves the editor page.
  645. # This will free all the query resources in Impala, but also make its results inaccessible.
  646. ## close_queries=true
  647. # If > 0, the query will be timed out (i.e. cancelled) if Impala does not do any work
  648. # (compute or send back results) for that query within QUERY_TIMEOUT_S seconds.
  649. ## query_timeout_s=600
  650. # If > 0, the session will be timed out (i.e. cancelled) if Impala does not do any work
  651. # (compute or send back results) for that session within QUERY_TIMEOUT_S seconds (default 12hours).
  652. ## session_timeout_s=43200
  653. # Override the desktop default username and password of the hue user used for authentications with other services.
  654. # e.g. Used for LDAP/PAM pass-through authentication.
  655. ## auth_username=hue
  656. ## auth_password=
  657. [[ssl]]
  658. # SSL communication enabled for this server.
  659. ## enabled=false
  660. # Path to Certificate Authority certificates.
  661. ## cacerts=/etc/hue/cacerts.pem
  662. # Choose whether Hue should validate certificates received from the server.
  663. ## validate=true
  664. ###########################################################################
  665. # Settings to configure the Spark application.
  666. ###########################################################################
  667. [spark]
  668. # Host address of the Livy Server.
  669. ## livy_server_host=localhost
  670. # Port of the Livy Server.
  671. ## livy_server_port=8998
  672. # Configure livy to start in local 'process' mode, or 'yarn' workers.
  673. ## livy_server_session_kind=process
  674. # If livy should use proxy users when submitting a job.
  675. ## livy_impersonation_enabled=true
  676. # Host of the Sql Server
  677. ## sql_server_host=localhost
  678. # Port of the Sql Server
  679. ## sql_server_port=10000
  680. ###########################################################################
  681. # Settings to configure the Oozie app
  682. ###########################################################################
  683. [oozie]
  684. # Location on local FS where the examples are stored.
  685. ## local_data_dir=..../examples
  686. # Location on local FS where the data for the examples is stored.
  687. ## sample_data_dir=...thirdparty/sample_data
  688. # Location on HDFS where the oozie examples and workflows are stored.
  689. ## remote_data_dir=/user/hue/oozie/workspaces
  690. # Maximum of Oozie workflows or coodinators to retrieve in one API call.
  691. ## oozie_jobs_count=50
  692. # Use Cron format for defining the frequency of a Coordinator instead of the old frequency number/unit.
  693. ## enable_cron_scheduling=true
  694. ###########################################################################
  695. # Settings to configure the Filebrowser app
  696. ###########################################################################
  697. [filebrowser]
  698. # Location on local filesystem where the uploaded archives are temporary stored.
  699. ## archive_upload_tempdir=/tmp
  700. # Show Download Button for HDFS file browser.
  701. ## show_download_button=false
  702. # Show Upload Button for HDFS file browser.
  703. ## show_upload_button=false
  704. ###########################################################################
  705. # Settings to configure Pig
  706. ###########################################################################
  707. [pig]
  708. # Location of piggybank.jar on local filesystem.
  709. ## local_sample_dir=/usr/share/hue/apps/pig/examples
  710. # Location piggybank.jar will be copied to in HDFS.
  711. ## remote_data_dir=/user/hue/pig/examples
  712. ###########################################################################
  713. # Settings to configure Sqoop2
  714. ###########################################################################
  715. [sqoop]
  716. # For autocompletion, fill out the librdbms section.
  717. # Sqoop server URL
  718. ## server_url=http://localhost:12000/sqoop
  719. # Path to configuration directory
  720. ## sqoop_conf_dir=/etc/sqoop2/conf
  721. ###########################################################################
  722. # Settings to configure Proxy
  723. ###########################################################################
  724. [proxy]
  725. # Comma-separated list of regular expressions,
  726. # which match 'host:port' of requested proxy target.
  727. ## whitelist=(localhost|127\.0\.0\.1):(50030|50070|50060|50075)
  728. # Comma-separated list of regular expressions,
  729. # which match any prefix of 'host:port/path' of requested proxy target.
  730. # This does not support matching GET parameters.
  731. ## blacklist=
  732. ###########################################################################
  733. # Settings to configure HBase Browser
  734. ###########################################################################
  735. [hbase]
  736. # Comma-separated list of HBase Thrift servers for clusters in the format of '(name|host:port)'.
  737. # Use full hostname with security.
  738. # If using Kerberos we assume GSSAPI SASL, not PLAIN.
  739. ## hbase_clusters=(Cluster|localhost:9090)
  740. # HBase configuration directory, where hbase-site.xml is located.
  741. ## hbase_conf_dir=/etc/hbase/conf
  742. # Hard limit of rows or columns per row fetched before truncating.
  743. ## truncate_limit = 500
  744. # 'buffered' is the default of the HBase Thrift Server and supports security.
  745. # 'framed' can be used to chunk up responses,
  746. # which is useful when used in conjunction with the nonblocking server in Thrift.
  747. ## thrift_transport=buffered
  748. ###########################################################################
  749. # Settings to configure Solr Search
  750. ###########################################################################
  751. [search]
  752. # URL of the Solr Server
  753. ## solr_url=http://localhost:8983/solr/
  754. # Requires FQDN in solr_url if enabled
  755. ## security_enabled=false
  756. ## Query sent when no term is entered
  757. ## empty_query=*:*
  758. # Use latest Solr 5.2+ features.
  759. ## latest=false
  760. ###########################################################################
  761. # Settings to configure Solr API lib
  762. ###########################################################################
  763. [libsolr]
  764. # Choose whether Hue should validate certificates received from the server.
  765. ## ssl_cert_ca_verify=true
  766. ###########################################################################
  767. # Settings to configure Solr Indexer
  768. ###########################################################################
  769. [indexer]
  770. # Location of the solrctl binary.
  771. ## solrctl_path=/usr/bin/solrctl
  772. ###########################################################################
  773. # Settings to configure Job Designer
  774. ###########################################################################
  775. [jobsub]
  776. # Location on local FS where examples and template are stored.
  777. ## local_data_dir=..../data
  778. # Location on local FS where sample data is stored
  779. ## sample_data_dir=...thirdparty/sample_data
  780. ###########################################################################
  781. # Settings to configure Job Browser.
  782. ###########################################################################
  783. [jobbrowser]
  784. # Share submitted jobs information with all users. If set to false,
  785. # submitted jobs are visible only to the owner and administrators.
  786. ## share_jobs=true
  787. # Whether to disalbe the job kill button for all users in the jobbrowser
  788. ## disable_killing_jobs=false
  789. ###########################################################################
  790. # Settings to configure Sentry / Security App.
  791. ###########################################################################
  792. [security]
  793. # Use Sentry API V1 for Hive.
  794. ## hive_v1=true
  795. # Use Sentry API V2 for Hive.
  796. ## hive_v2=false
  797. # Use Sentry API V2 for Solr.
  798. ## solr_v2=false
  799. ###########################################################################
  800. # Settings to configure the Zookeeper application.
  801. ###########################################################################
  802. [zookeeper]
  803. [[clusters]]
  804. [[[default]]]
  805. # Zookeeper ensemble. Comma separated list of Host/Port.
  806. # e.g. localhost:2181,localhost:2182,localhost:2183
  807. ## host_ports=localhost:2181
  808. # The URL of the REST contrib service (required for znode browsing).
  809. ## rest_url=http://localhost:9998
  810. # Name of Kerberos principal when using security.
  811. ## principal_name=zookeeper
  812. ###########################################################################
  813. # Settings for the User Admin application
  814. ###########################################################################
  815. [useradmin]
  816. # Default home directory permissions
  817. ## home_dir_permissions=0755
  818. # The name of the default user group that users will be a member of
  819. ## default_user_group=default
  820. [[password_policy]]
  821. # Set password policy to all users. The default policy requires password to be at least 8 characters long,
  822. # and contain both uppercase and lowercase letters, numbers, and special characters.
  823. ## is_enabled=false
  824. ## pwd_regex="^(?=.*?[A-Z])(?=(.*[a-z]){1,})(?=(.*[\d]){1,})(?=(.*[\W_]){1,}).{8,}$"
  825. ## pwd_hint="The password must be at least 8 characters long, and must contain both uppercase and lowercase letters, at least one number, and at least one special character."
  826. ## pwd_error_message="The password must be at least 8 characters long, and must contain both uppercase and lowercase letters, at least one number, and at least one special character."
  827. ###########################################################################
  828. # Settings to configure liboozie
  829. ###########################################################################
  830. [liboozie]
  831. # The URL where the Oozie service runs on. This is required in order for
  832. # users to submit jobs. Empty value disables the config check.
  833. ## oozie_url=http://localhost:11000/oozie
  834. # Requires FQDN in oozie_url if enabled
  835. ## security_enabled=false
  836. # Location on HDFS where the workflows/coordinator are deployed when submitted.
  837. ## remote_deployement_dir=/user/hue/oozie/deployments
  838. ###########################################################################
  839. # Settings for the AWS lib
  840. ###########################################################################
  841. [aws]
  842. [[aws_accounts]]
  843. # Default AWS account
  844. [[[default]]]
  845. # AWS credentials
  846. ## access_key_id=
  847. ## secret_access_key=
  848. # Allow to use either environment variables or
  849. # EC2 InstanceProfile to retrieve AWS credentials.
  850. ## allow_environment_credentials=yes
  851. # AWS region to use
  852. ## region=us-east-1
  853. ###########################################################################
  854. # Settings for the Sentry lib
  855. ###########################################################################
  856. [libsentry]
  857. # Hostname or IP of server.
  858. ## hostname=localhost
  859. # Port the sentry service is running on.
  860. ## port=8038
  861. # Sentry configuration directory, where sentry-site.xml is located.
  862. ## sentry_conf_dir=/etc/sentry/conf
  863. ###########################################################################
  864. # Settings to configure the ZooKeeper Lib
  865. ###########################################################################
  866. [libzookeeper]
  867. # ZooKeeper ensemble. Comma separated list of Host/Port.
  868. # e.g. localhost:2181,localhost:2182,localhost:2183
  869. ## ensemble=localhost:2181
  870. # Name of Kerberos principal when using security.
  871. ## principal_name=zookeeper
  872. ###########################################################################
  873. # Settings for the RDBMS application
  874. ###########################################################################
  875. [librdbms]
  876. # The RDBMS app can have any number of databases configured in the databases
  877. # section. A database is known by its section name
  878. # (IE sqlite, mysql, psql, and oracle in the list below).
  879. [[databases]]
  880. # sqlite configuration.
  881. ## [[[sqlite]]]
  882. # Name to show in the UI.
  883. ## nice_name=SQLite
  884. # For SQLite, name defines the path to the database.
  885. ## name=/tmp/sqlite.db
  886. # Database backend to use.
  887. ## engine=sqlite
  888. # Database options to send to the server when connecting.
  889. # https://docs.djangoproject.com/en/1.4/ref/databases/
  890. ## options={}
  891. # mysql, oracle, or postgresql configuration.
  892. ## [[[mysql]]]
  893. # Name to show in the UI.
  894. ## nice_name="My SQL DB"
  895. # For MySQL and PostgreSQL, name is the name of the database.
  896. # For Oracle, Name is instance of the Oracle server. For express edition
  897. # this is 'xe' by default.
  898. ## name=mysqldb
  899. # Database backend to use. This can be:
  900. # 1. mysql
  901. # 2. postgresql
  902. # 3. oracle
  903. ## engine=mysql
  904. # IP or hostname of the database to connect to.
  905. ## host=localhost
  906. # Port the database server is listening to. Defaults are:
  907. # 1. MySQL: 3306
  908. # 2. PostgreSQL: 5432
  909. # 3. Oracle Express Edition: 1521
  910. ## port=3306
  911. # Username to authenticate with when connecting to the database.
  912. ## user=example
  913. # Password matching the username to authenticate with when
  914. # connecting to the database.
  915. ## password=example
  916. # Database options to send to the server when connecting.
  917. # https://docs.djangoproject.com/en/1.4/ref/databases/
  918. ## options={}
  919. ###########################################################################
  920. # Settings to configure SAML
  921. ###########################################################################
  922. [libsaml]
  923. # Xmlsec1 binary path. This program should be executable by the user running Hue.
  924. ## xmlsec_binary=/usr/local/bin/xmlsec1
  925. # Entity ID for Hue acting as service provider.
  926. # Can also accept a pattern where '<base_url>' will be replaced with server URL base.
  927. ## entity_id="<base_url>/saml2/metadata/"
  928. # Create users from SSO on login.
  929. ## create_users_on_login=true
  930. # Required attributes to ask for from IdP.
  931. # This requires a comma separated list.
  932. ## required_attributes=uid
  933. # Optional attributes to ask for from IdP.
  934. # This requires a comma separated list.
  935. ## optional_attributes=
  936. # IdP metadata in the form of a file. This is generally an XML file containing metadata that the Identity Provider generates.
  937. ## metadata_file=
  938. # Private key to encrypt metadata with.
  939. ## key_file=
  940. # Signed certificate to send along with encrypted metadata.
  941. ## cert_file=
  942. # Path to a file containing the password private key.
  943. ## key_file_password=/path/key
  944. # Execute this script to produce the private key password. This will be used when `key_file_password` is not set.
  945. ## key_file_password_script=/path/pwd.sh
  946. # A mapping from attributes in the response from the IdP to django user attributes.
  947. ## user_attribute_mapping={'uid': ('username', )}
  948. # Have Hue initiated authn requests be signed and provide a certificate.
  949. ## authn_requests_signed=false
  950. # Have Hue initiated logout requests be signed and provide a certificate.
  951. ## logout_requests_signed=false
  952. # Username can be sourced from 'attributes' or 'nameid'.
  953. ## username_source=attributes
  954. # Performs the logout or not.
  955. ## logout_enabled=true
  956. ###########################################################################
  957. # Settings to configure OpenID
  958. ###########################################################################
  959. [libopenid]
  960. # (Required) OpenId SSO endpoint url.
  961. ## server_endpoint_url=https://www.google.com/accounts/o8/id
  962. # OpenId 1.1 identity url prefix to be used instead of SSO endpoint url
  963. # This is only supported if you are using an OpenId 1.1 endpoint
  964. ## identity_url_prefix=https://app.onelogin.com/openid/your_company.com/
  965. # Create users from OPENID on login.
  966. ## create_users_on_login=true
  967. # Use email for username
  968. ## use_email_for_username=true
  969. ###########################################################################
  970. # Settings to configure OAuth
  971. ###########################################################################
  972. [liboauth]
  973. # NOTE:
  974. # To work, each of the active (i.e. uncommented) service must have
  975. # applications created on the social network.
  976. # Then the "consumer key" and "consumer secret" must be provided here.
  977. #
  978. # The addresses where to do so are:
  979. # Twitter: https://dev.twitter.com/apps
  980. # Google+ : https://cloud.google.com/
  981. # Facebook: https://developers.facebook.com/apps
  982. # Linkedin: https://www.linkedin.com/secure/developer
  983. #
  984. # Additionnaly, the following must be set in the application settings:
  985. # Twitter: Callback URL (aka Redirect URL) must be set to http://YOUR_HUE_IP_OR_DOMAIN_NAME/oauth/social_login/oauth_authenticated
  986. # Google+ : CONSENT SCREEN must have email address
  987. # Facebook: Sandbox Mode must be DISABLED
  988. # Linkedin: "In OAuth User Agreement", r_emailaddress is REQUIRED
  989. # The Consumer key of the application
  990. ## consumer_key_twitter=
  991. ## consumer_key_google=
  992. ## consumer_key_facebook=
  993. ## consumer_key_linkedin=
  994. # The Consumer secret of the application
  995. ## consumer_secret_twitter=
  996. ## consumer_secret_google=
  997. ## consumer_secret_facebook=
  998. ## consumer_secret_linkedin=
  999. # The Request token URL
  1000. ## request_token_url_twitter=https://api.twitter.com/oauth/request_token
  1001. ## request_token_url_google=https://accounts.google.com/o/oauth2/auth
  1002. ## request_token_url_linkedin=https://www.linkedin.com/uas/oauth2/authorization
  1003. ## request_token_url_facebook=https://graph.facebook.com/oauth/authorize
  1004. # The Access token URL
  1005. ## access_token_url_twitter=https://api.twitter.com/oauth/access_token
  1006. ## access_token_url_google=https://accounts.google.com/o/oauth2/token
  1007. ## access_token_url_facebook=https://graph.facebook.com/oauth/access_token
  1008. ## access_token_url_linkedin=https://api.linkedin.com/uas/oauth2/accessToken
  1009. # The Authenticate URL
  1010. ## authenticate_url_twitter=https://api.twitter.com/oauth/authorize
  1011. ## authenticate_url_google=https://www.googleapis.com/oauth2/v1/userinfo?access_token=
  1012. ## authenticate_url_facebook=https://graph.facebook.com/me?access_token=
  1013. ## authenticate_url_linkedin=https://api.linkedin.com/v1/people/~:(email-address)?format=json&oauth2_access_token=
  1014. # Username Map. Json Hash format.
  1015. # Replaces username parts in order to simplify usernames obtained
  1016. # Example: {"@sub1.domain.com":"_S1", "@sub2.domain.com":"_S2"}
  1017. # converts 'email@sub1.domain.com' to 'email_S1'
  1018. ## username_map={}
  1019. # Whitelisted domains (only applies to Google OAuth). CSV format.
  1020. ## whitelisted_domains_google=
  1021. ###########################################################################
  1022. # Settings to configure Metadata
  1023. ###########################################################################
  1024. [metadata]
  1025. # For metadata tagging and enhancement features
  1026. [[optimizer]]
  1027. # For SQL query and table analysis
  1028. # Base URL to Optimizer API.
  1029. ## api_url=https://alpha.optimizer.cloudera.com
  1030. # The name of the product or group which will have API access to the emails associated with it.
  1031. ## product_name=hue
  1032. # A secret passphrase associated with the productName
  1033. ## product_secret=hue
  1034. # Execute this script to produce the product secret. This will be used when `product_secret` is not set.
  1035. ## product_secret_script=
  1036. # The email of the Optimizer account you want to associate with the Product.
  1037. ## email=hue@gethue.com
  1038. # The password associated with the Optimizer account you to associate with the Product.
  1039. ## email_password=hue
  1040. # Execute this script to produce the email password. This will be used when `email_password` is not set.
  1041. ## password_script=
  1042. # In secure mode (HTTPS), if Optimizer SSL certificates have to be verified against certificate authority.
  1043. ## ssl_cert_ca_verify=True
  1044. [[navigator]]
  1045. # For tagging tables, files and getting lineage of data.
  1046. # Navigator API URL with version (without version suffix)
  1047. ## api_url=http://localhost:7187/api
  1048. # Navigator API HTTP authentication username and password
  1049. # Override the desktop default username and password of the hue user used for authentications with other services.
  1050. # e.g. Used for LDAP/PAM pass-through authentication.
  1051. ## auth_username=hue
  1052. ## auth_password=