pseudo-distributed.ini.tmpl 31 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942
  1. #####################################
  2. # DEVELOPMENT EDITION
  3. #####################################
  4. # Hue configuration file
  5. # ===================================
  6. #
  7. # For complete documentation about the contents of this file, run
  8. # $ <hue_root>/build/env/bin/hue config_help
  9. #
  10. # All .ini files under the current directory are treated equally. Their
  11. # contents are merged to form the Hue configuration, which can
  12. # can be viewed on the Hue at
  13. # http://<hue_host>:<port>/dump_config
  14. ###########################################################################
  15. # General configuration for core Desktop features (authentication, etc)
  16. ###########################################################################
  17. [desktop]
  18. send_dbug_messages=1
  19. # To show database transactions, set database_logging to 1
  20. database_logging=0
  21. # Set this to a random string, the longer the better.
  22. # This is used for secure hashing in the session store.
  23. secret_key=
  24. # Webserver listens on this address and port
  25. http_host=0.0.0.0
  26. http_port=8000
  27. # Time zone name
  28. time_zone=America/Los_Angeles
  29. # Enable or disable Django debug mode
  30. ## django_debug_mode=true
  31. # Enable or disable backtrace for server error
  32. ## http_500_debug_mode=true
  33. # Enable or disable memory profiling.
  34. ## memory_profiler=false
  35. # Server email for internal error messages
  36. ## django_server_email='hue@localhost.localdomain'
  37. # Email backend
  38. ## django_email_backend=django.core.mail.backends.smtp.EmailBackend
  39. # Webserver runs as this user
  40. ## server_user=hue
  41. ## server_group=hue
  42. # If set to false, runcpserver will not actually start the web server.
  43. # Used if Apache is being used as a WSGI container.
  44. ## enable_server=yes
  45. # Number of threads used by the CherryPy web server
  46. ## cherrypy_server_threads=10
  47. # Filename of SSL Certificate
  48. ## ssl_certificate=
  49. # Filename of SSL RSA Private Key
  50. ## ssl_private_key=
  51. # List of allowed and disallowed ciphers in cipher list format.
  52. # See http://www.openssl.org/docs/apps/ciphers.html for more information on cipher list format.
  53. ## ssl_cipher_list=DEFAULT:!aNULL:!eNULL:!LOW:!EXPORT:!SSLv2
  54. # LDAP password of the hue user used for LDAP authentications. For example for LDAP Authentication with HiveServer2.
  55. # ldap_password=
  56. # Default encoding for site data
  57. ## default_site_encoding=utf-8
  58. # Help improve Hue with anonymous usage analytics.
  59. # Use Google Analytics to see how many times an application or specific section of an application is used, nothing more.
  60. ## collect_usage=true
  61. # Support for HTTPS termination at the load-balancer level with SECURE_PROXY_SSL_HEADER.
  62. ## secure_proxy_ssl_header=false
  63. # Comma-separated list of Django middleware classes to use.
  64. # See https://docs.djangoproject.com/en/1.4/ref/middleware/ for more details on middlewares in Django.
  65. ## middleware=desktop.auth.backend.LdapSynchronizationBackend
  66. # Comma-separated list of regular expressions, which match the redirect URL.
  67. # For example, to restrict to your local domain and FQDN, the following value can be used:
  68. # ^\/.*$,^http:\/\/www.mydomain.com\/.*$
  69. ## redirect_whitelist=
  70. # Comma separated list of apps to not load at server startup.
  71. # e.g.: pig,zookeeper
  72. ## app_blacklist=
  73. # The directory where to store the auditing logs. Auditing is disable if the value is empty.
  74. # e.g. /var/log/hue/audit.log
  75. ## audit_event_log_dir=
  76. # Size in KB/MB/GB for audit log to rollover.
  77. ## audit_log_max_file_size=100MB
  78. #poll_enabled=false
  79. # Administrators
  80. # ----------------
  81. [[django_admins]]
  82. ## [[[admin1]]]
  83. ## name=john
  84. ## email=john@doe.com
  85. # UI customizations
  86. # -------------------
  87. [[custom]]
  88. # Top banner HTML code
  89. ## banner_top_html=
  90. # Configuration options for user authentication into the web application
  91. # ------------------------------------------------------------------------
  92. [[auth]]
  93. # Authentication backend. Common settings are:
  94. # - django.contrib.auth.backends.ModelBackend (entirely Django backend)
  95. # - desktop.auth.backend.AllowAllBackend (allows everyone)
  96. # - desktop.auth.backend.AllowFirstUserDjangoBackend
  97. # (Default. Relies on Django and user manager, after the first login)
  98. # - desktop.auth.backend.LdapBackend
  99. # - desktop.auth.backend.PamBackend
  100. # - desktop.auth.backend.SpnegoDjangoBackend
  101. # - desktop.auth.backend.RemoteUserDjangoBackend
  102. # - libsaml.backend.SAML2Backend
  103. # - libopenid.backend.OpenIDBackend
  104. # - liboauth.backend.OAuthBackend
  105. # (New oauth, support Twitter, Facebook, Google+ and Linkedin
  106. ## backend=desktop.auth.backend.AllowFirstUserDjangoBackend
  107. # The service to use when querying PAM.
  108. ## pam_service=login
  109. # When using the desktop.auth.backend.RemoteUserDjangoBackend, this sets
  110. # the normalized name of the header that contains the remote user.
  111. # The HTTP header in the request is converted to a key by converting
  112. # all characters to uppercase, replacing any hyphens with underscores
  113. # and adding an HTTP_ prefix to the name. So, for example, if the header
  114. # is called Remote-User that would be configured as HTTP_REMOTE_USER
  115. #
  116. # Defaults to HTTP_REMOTE_USER
  117. ## remote_user_header=HTTP_REMOTE_USER
  118. # Ignore the case of usernames when searching for existing users.
  119. # Only supported in remoteUserDjangoBackend.
  120. ## ignore_username_case=false
  121. # Ignore the case of usernames when searching for existing users to authenticate with.
  122. # Only supported in remoteUserDjangoBackend.
  123. ## force_username_lowercase=false
  124. # Users will expire after they have not logged in for 'n' amount of seconds.
  125. # A negative number means that users will never expire.
  126. ## expires_after=-1
  127. # Apply 'expires_after' to superusers.
  128. ## expire_superusers=true
  129. # Configuration options for connecting to LDAP and Active Directory
  130. # -------------------------------------------------------------------
  131. [[ldap]]
  132. # The search base for finding users and groups
  133. ## base_dn="DC=mycompany,DC=com"
  134. # URL of the LDAP server
  135. ## ldap_url=ldap://auth.mycompany.com
  136. # A PEM-format file containing certificates for the CA's that
  137. # Hue will trust for authentication over TLS.
  138. # The certificate for the CA that signed the
  139. # LDAP server certificate must be included among these certificates.
  140. # See more here http://www.openldap.org/doc/admin24/tls.html.
  141. ## ldap_cert=
  142. ## use_start_tls=true
  143. # Distinguished name of the user to bind as -- not necessary if the LDAP server
  144. # supports anonymous searches
  145. ## bind_dn="CN=ServiceAccount,DC=mycompany,DC=com"
  146. # Password of the bind user -- not necessary if the LDAP server supports
  147. # anonymous searches
  148. ## bind_password=
  149. # Pattern for searching for usernames -- Use <username> for the parameter
  150. # For use when using LdapBackend for Hue authentication
  151. ## ldap_username_pattern="uid=<username>,ou=People,dc=mycompany,dc=com"
  152. # Create users in Hue when they try to login with their LDAP credentials
  153. # For use when using LdapBackend for Hue authentication
  154. ## create_users_on_login = true
  155. # Synchronize a users groups when they login
  156. ## sync_groups_on_login=false
  157. # Ignore the case of usernames when searching for existing users in Hue.
  158. ## ignore_username_case=false
  159. # Force usernames to lowercase when creating new users from LDAP.
  160. ## force_username_lowercase=false
  161. # Use search bind authentication.
  162. ## search_bind_authentication=true
  163. # Choose which kind of subgrouping to use: nested or suboordinate (deprecated).
  164. ## subgroups=suboordinate
  165. # Define the number of levels to search for nested members.
  166. ## nested_members_search_depth=10
  167. [[[users]]]
  168. # Base filter for searching for users
  169. ## user_filter="objectclass=*"
  170. # The username attribute in the LDAP schema
  171. ## user_name_attr=sAMAccountName
  172. [[[groups]]]
  173. # Base filter for searching for groups
  174. ## group_filter="objectclass=*"
  175. # The username attribute in the LDAP schema
  176. ## group_name_attr=cn
  177. [[[ldap_servers]]]
  178. ## [[[[mycompany]]]]
  179. # The search base for finding users and groups
  180. ## base_dn="DC=mycompany,DC=com"
  181. # URL of the LDAP server
  182. ## ldap_url=ldap://auth.mycompany.com
  183. # A PEM-format file containing certificates for the CA's that
  184. # Hue will trust for authentication over TLS.
  185. # The certificate for the CA that signed the
  186. # LDAP server certificate must be included among these certificates.
  187. # See more here http://www.openldap.org/doc/admin24/tls.html.
  188. ## ldap_cert=
  189. ## use_start_tls=true
  190. # Distinguished name of the user to bind as -- not necessary if the LDAP server
  191. # supports anonymous searches
  192. ## bind_dn="CN=ServiceAccount,DC=mycompany,DC=com"
  193. # Password of the bind user -- not necessary if the LDAP server supports
  194. # anonymous searches
  195. ## bind_password=
  196. # Pattern for searching for usernames -- Use <username> for the parameter
  197. # For use when using LdapBackend for Hue authentication
  198. ## ldap_username_pattern="uid=<username>,ou=People,dc=mycompany,dc=com"
  199. ## [[[[[users]]]]]
  200. # Base filter for searching for users
  201. ## user_filter="objectclass=Person"
  202. # The username attribute in the LDAP schema
  203. ## user_name_attr=sAMAccountName
  204. ## [[[[[groups]]]]]
  205. # Base filter for searching for groups
  206. ## group_filter="objectclass=groupOfNames"
  207. # The username attribute in the LDAP schema
  208. ## group_name_attr=cn
  209. # Configuration options for specifying the Desktop Database. For more info,
  210. # see http://docs.djangoproject.com/en/1.1/ref/settings/#database-engine
  211. # ------------------------------------------------------------------------
  212. [[database]]
  213. # Database engine is typically one of:
  214. # postgresql_psycopg2, mysql, or sqlite3
  215. #
  216. # Note that for sqlite3, 'name', below is a filename;
  217. # for other backends, it is the database name.
  218. ## engine=sqlite3
  219. ## host=
  220. ## port=
  221. ## user=
  222. ## password=
  223. ## name=desktop/desktop.db
  224. ## options={}
  225. # Configuration options for specifying the Desktop session.
  226. # For more info, see https://docs.djangoproject.com/en/1.4/topics/http/sessions/
  227. # ------------------------------------------------------------------------
  228. [[session]]
  229. # The cookie containing the users' session ID will expire after this amount of time in seconds.
  230. # Default is 2 weeks.
  231. ## ttl=1209600
  232. # The cookie containing the users' session ID will be secure.
  233. # Should only be enabled with HTTPS.
  234. ## secure=false
  235. # The cookie containing the users' session ID will use the HTTP only flag.
  236. ## http_only=false
  237. # Use session-length cookies. Logs out the user when she closes the browser window.
  238. ## expire_at_browser_close=false
  239. # Configuration options for connecting to an external SMTP server
  240. # ------------------------------------------------------------------------
  241. [[smtp]]
  242. # The SMTP server information for email notification delivery
  243. host=localhost
  244. port=25
  245. user=
  246. password=
  247. # Whether to use a TLS (secure) connection when talking to the SMTP server
  248. tls=no
  249. # Default email address to use for various automated notification from Hue
  250. ## default_from_email=hue@localhost
  251. # Configuration options for Kerberos integration for secured Hadoop clusters
  252. # ------------------------------------------------------------------------
  253. [[kerberos]]
  254. # Path to Hue's Kerberos keytab file
  255. ## hue_keytab=
  256. # Kerberos principal name for Hue
  257. ## hue_principal=hue/hostname.foo.com
  258. # Path to kinit
  259. ## kinit_path=/path/to/kinit
  260. # Configuration options for using OAuthBackend (Core) login
  261. # ------------------------------------------------------------------------
  262. [[oauth]]
  263. # The Consumer key of the application
  264. ## consumer_key=XXXXXXXXXXXXXXXXXXXXX
  265. # The Consumer secret of the application
  266. ## consumer_secret=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  267. # The Request token URL
  268. ## request_token_url=https://api.twitter.com/oauth/request_token
  269. # The Access token URL
  270. ## access_token_url=https://api.twitter.com/oauth/access_token
  271. # The Authorize URL
  272. ## authenticate_url=https://api.twitter.com/oauth/authorize
  273. ###########################################################################
  274. # Settings to configure SAML
  275. ###########################################################################
  276. [libsaml]
  277. # Xmlsec1 binary path. This program should be executable by the user running Hue.
  278. ## xmlsec_binary=/usr/local/bin/xmlsec1
  279. # Entity ID for Hue acting as service provider.
  280. # Can also accept a pattern where '<base_url>' will be replaced with server URL base.
  281. ## entity_id="<base_url>/saml2/metadata/"
  282. # Create users from SSO on login.
  283. ## create_users_on_login=true
  284. # Required attributes to ask for from IdP.
  285. # This requires a comma separated list.
  286. ## required_attributes=uid
  287. # Optional attributes to ask for from IdP.
  288. # This requires a comma separated list.
  289. ## optional_attributes=
  290. # IdP metadata in the form of a file. This is generally an XML file containing metadata that the Identity Provider generates.
  291. ## metadata_file=
  292. # Private key to encrypt metadata with.
  293. ## key_file=
  294. # Signed certificate to send along with encrypted metadata.
  295. ## cert_file=
  296. # A mapping from attributes in the response from the IdP to django user attributes.
  297. ## user_attribute_mapping={'uid':'username'}
  298. # Have Hue initiated authn requests be signed and provide a certificate.
  299. ## authn_requests_signed=false
  300. # Have Hue initiated logout requests be signed and provide a certificate.
  301. ## logout_requests_signed=false
  302. # Username can be sourced from 'attributes' or 'nameid'.
  303. ## username_source=attributes
  304. # Performs the logout or not.
  305. ## logout_enabled=true
  306. ###########################################################################
  307. # Settings to configure OPENID
  308. ###########################################################################
  309. [libopenid]
  310. # (Required) OpenId SSO endpoint url.
  311. ## server_endpoint_url=https://www.google.com/accounts/o8/id
  312. # OpenId 1.1 identity url prefix to be used instead of SSO endpoint url
  313. # This is only supported if you are using an OpenId 1.1 endpoint
  314. ## identity_url_prefix=https://app.onelogin.com/openid/your_company.com/
  315. # Create users from OPENID on login.
  316. ## create_users_on_login=true
  317. # Use email for username
  318. ## use_email_for_username=true
  319. ###########################################################################
  320. # Settings to configure OAuth
  321. ###########################################################################
  322. [liboauth]
  323. # NOTE:
  324. # To work, each of the active (i.e. uncommented) service must have
  325. # applications created on the social network.
  326. # Then the "consumer key" and "consumer secret" must be provided here.
  327. #
  328. # The addresses where to do so are:
  329. # Twitter: https://dev.twitter.com/apps
  330. # Google+ : https://cloud.google.com/
  331. # Facebook: https://developers.facebook.com/apps
  332. # Linkedin: https://www.linkedin.com/secure/developer
  333. #
  334. # Additionnaly, the following must be set in the application settings:
  335. # Twitter: Callback URL (aka Redirect URL) must be set to http://YOUR_HUE_IP_OR_DOMAIN_NAME/oauth/social_login/oauth_authenticated
  336. # Google+ : CONSENT SCREEN must have email address
  337. # Facebook: Sandbox Mode must be DISABLED
  338. # Linkedin: "In OAuth User Agreement", r_emailaddress is REQUIRED
  339. # The Consumer key of the application
  340. ## consumer_key_twitter=
  341. ## consumer_key_google=
  342. ## consumer_key_facebook=
  343. ## consumer_key_linkedin=
  344. # The Consumer secret of the application
  345. ## consumer_secret_twitter=
  346. ## consumer_secret_google=
  347. ## consumer_secret_facebook=
  348. ## consumer_secret_linkedin=
  349. # The Request token URL
  350. ## request_token_url_twitter=https://api.twitter.com/oauth/request_token
  351. ## request_token_url_google=https://accounts.google.com/o/oauth2/auth
  352. ## request_token_url_linkedin=https://www.linkedin.com/uas/oauth2/authorization
  353. ## request_token_url_facebook=https://graph.facebook.com/oauth/authorize
  354. # The Access token URL
  355. ## access_token_url_twitter=https://api.twitter.com/oauth/access_token
  356. ## access_token_url_google=https://accounts.google.com/o/oauth2/token
  357. ## access_token_url_facebook=https://graph.facebook.com/oauth/access_token
  358. ## access_token_url_linkedin=https://api.linkedin.com/uas/oauth2/accessToken
  359. # The Authenticate URL
  360. ## authenticate_url_twitter=https://api.twitter.com/oauth/authorize
  361. ## authenticate_url_google=https://www.googleapis.com/oauth2/v1/userinfo?access_token=
  362. ## authenticate_url_facebook=https://graph.facebook.com/me?access_token=
  363. ## authenticate_url_linkedin=https://api.linkedin.com/v1/people/~:(email-address)?format=json&oauth2_access_token=
  364. # Username Map. Json Hash format.
  365. # Replaces username parts in order to simplify usernames obtained
  366. # Example: {"@sub1.domain.com":"_S1", "@sub2.domain.com":"_S2"}
  367. # converts 'email@sub1.domain.com' to 'email_S1'
  368. ## username_map={}
  369. # Whitelisted domains (only applies to Google OAuth). CSV format.
  370. ## whitelisted_domains_google=
  371. ###########################################################################
  372. # Settings for the RDBMS application
  373. ###########################################################################
  374. [librdbms]
  375. # The RDBMS app can have any number of databases configured in the databases
  376. # section. A database is known by its section name
  377. # (IE sqlite, mysql, psql, and oracle in the list below).
  378. [[databases]]
  379. # sqlite configuration.
  380. ## [[[sqlite]]]
  381. # Name to show in the UI.
  382. ## nice_name=SQLite
  383. # For SQLite, name defines the path to the database.
  384. ## name=/tmp/sqlite.db
  385. # Database backend to use.
  386. ## engine=sqlite
  387. # mysql, oracle, or postgresql configuration.
  388. ## [[[mysql]]]
  389. # Name to show in the UI.
  390. ## nice_name="My SQL DB"
  391. # For MySQL and PostgreSQL, name is the name of the database.
  392. # For Oracle, Name is instance of the Oracle server. For express edition
  393. # this is 'xe' by default.
  394. ## name=mysqldb
  395. # Database backend to use. This can be:
  396. # 1. mysql
  397. # 2. postgresql
  398. # 3. oracle
  399. ## engine=mysql
  400. # IP or hostname of the database to connect to.
  401. ## host=localhost
  402. # Port the database server is listening to. Defaults are:
  403. # 1. MySQL: 3306
  404. # 2. PostgreSQL: 5432
  405. # 3. Oracle Express Edition: 1521
  406. ## port=3306
  407. # Username to authenticate with when connecting to the database.
  408. ## user=example
  409. # Password matching the username to authenticate with when
  410. # connecting to the database.
  411. ## password=example
  412. ###########################################################################
  413. # Settings to configure your Hadoop cluster.
  414. ###########################################################################
  415. [hadoop]
  416. # Configuration for HDFS NameNode
  417. # ------------------------------------------------------------------------
  418. [[hdfs_clusters]]
  419. # HA support by using HttpFs
  420. [[[default]]]
  421. # Enter the filesystem uri
  422. fs_defaultfs=hdfs://localhost:8020
  423. # NameNode logical name.
  424. ## logical_name=
  425. # Use WebHdfs/HttpFs as the communication mechanism.
  426. # Domain should be the NameNode or HttpFs host.
  427. # Default port is 14000 for HttpFs.
  428. ## webhdfs_url=http://localhost:50070/webhdfs/v1
  429. # Change this if your HDFS cluster is Kerberos-secured
  430. ## security_enabled=false
  431. # Settings about this HDFS cluster. If you install HDFS in a
  432. # different location, you need to set the following.
  433. # Defaults to $HADOOP_HDFS_HOME or /usr/lib/hadoop-hdfs
  434. ## hadoop_hdfs_home=/usr/lib/hadoop-hdfs
  435. # Defaults to $HADOOP_BIN or /usr/bin/hadoop
  436. ## hadoop_bin=/usr/bin/hadoop
  437. # Defaults to $HADOOP_CONF_DIR or /etc/hadoop/conf
  438. ## hadoop_conf_dir=/etc/hadoop/conf
  439. # Configuration for YARN (MR2)
  440. # ------------------------------------------------------------------------
  441. [[yarn_clusters]]
  442. [[[default]]]
  443. # Enter the host on which you are running the ResourceManager
  444. ## resourcemanager_host=localhost
  445. # The port where the ResourceManager IPC listens on
  446. ## resourcemanager_port=8032
  447. # Whether to submit jobs to this cluster
  448. submit_to=True
  449. # Change this if your YARN cluster is Kerberos-secured
  450. ## security_enabled=false
  451. # Settings about this MR2 cluster. If you install MR2 in a
  452. # different location, you need to set the following.
  453. # Defaults to $HADOOP_MR2_HOME or /usr/lib/hadoop-mapreduce
  454. ## hadoop_mapred_home=/usr/lib/hadoop-mapreduce
  455. # Defaults to $HADOOP_BIN or /usr/bin/hadoop
  456. ## hadoop_bin=/usr/bin/hadoop
  457. # Defaults to $HADOOP_CONF_DIR or /etc/hadoop/conf
  458. ## hadoop_conf_dir=/etc/hadoop/conf
  459. # URL of the ResourceManager API
  460. ## resourcemanager_api_url=http://localhost:8088
  461. # URL of the ProxyServer API
  462. ## proxy_api_url=http://localhost:8088
  463. # URL of the HistoryServer API
  464. # history_server_api_url=http://localhost:19888
  465. # Configuration for MapReduce (MR1)
  466. # ------------------------------------------------------------------------
  467. [[mapred_clusters]]
  468. [[[default]]]
  469. # Enter the host on which you are running the Hadoop JobTracker
  470. ## jobtracker_host=localhost
  471. # The port where the JobTracker IPC listens on
  472. ## jobtracker_port=8021
  473. # JobTracker logical name.
  474. ## logical_name=
  475. # Thrift plug-in port for the JobTracker
  476. ## thrift_port=9290
  477. # Whether to submit jobs to this cluster
  478. submit_to=False
  479. # Change this if your MapReduce cluster is Kerberos-secured
  480. ## security_enabled=false
  481. # Settings about this MR1 cluster. If you install MR1 in a
  482. # different location, you need to set the following.
  483. # Defaults to $HADOOP_MR1_HOME or /usr/lib/hadoop-0.20-mapreduce
  484. ## hadoop_mapred_home=/usr/lib/hadoop-0.20-mapreduce
  485. # Defaults to $HADOOP_BIN or /usr/bin/hadoop
  486. ## hadoop_bin=/usr/bin/hadoop
  487. # Defaults to $HADOOP_CONF_DIR or /etc/hadoop/conf
  488. ## hadoop_conf_dir=/etc/hadoop/conf
  489. # HA support by specifying multiple clusters
  490. # e.g.
  491. # [[[ha]]]
  492. # Enter the host on which you are running the failover JobTracker
  493. # jobtracker_host=localhost-ha
  494. ###########################################################################
  495. # Settings to configure the Filebrowser app
  496. ###########################################################################
  497. [filebrowser]
  498. # Location on local filesystem where the uploaded archives are temporary stored.
  499. ## archive_upload_tempdir=/tmp
  500. ###########################################################################
  501. # Settings to configure liboozie
  502. ###########################################################################
  503. [liboozie]
  504. # The URL where the Oozie service runs on. This is required in order for
  505. # users to submit jobs.
  506. ## oozie_url=http://localhost:11000/oozie
  507. # Requires FQDN in oozie_url if enabled
  508. ## security_enabled=false
  509. # Location on HDFS where the workflows/coordinator are deployed when submitted.
  510. ## remote_deployement_dir=/user/hue/oozie/deployments
  511. ###########################################################################
  512. # Settings to configure the Oozie app
  513. ###########################################################################
  514. [oozie]
  515. # Location on local FS where the examples are stored.
  516. ## local_data_dir=..../examples
  517. # Location on local FS where the data for the examples is stored.
  518. ## sample_data_dir=...thirdparty/sample_data
  519. # Location on HDFS where the oozie examples and workflows are stored.
  520. ## remote_data_dir=/user/hue/oozie/workspaces
  521. # Maximum of Oozie workflows or coodinators to retrieve in one API call.
  522. ## oozie_jobs_count=100
  523. # Use Cron format for defining the frequency of a Coordinator instead of the old frequency number/unit.
  524. ## enable_cron_scheduling=true
  525. ###########################################################################
  526. # Settings to configure Beeswax with Hive
  527. ###########################################################################
  528. [beeswax]
  529. # Host where Hive server Thrift daemon is running.
  530. # If Kerberos security is enabled, use fully-qualified domain name (FQDN).
  531. ## hive_server_host=<FQDN of Hive Server>
  532. # Port where HiveServer2 Thrift server runs on.
  533. ## hive_server_port=10000
  534. # Hive configuration directory, where hive-site.xml is located
  535. ## hive_conf_dir=/etc/hive/conf
  536. # Timeout in seconds for thrift calls to Hive service
  537. ## server_conn_timeout=120
  538. # Path to HiveServer2 start script
  539. ## hive_server_bin=/usr/lib/hive/bin/hiveserver2
  540. # Set a LIMIT clause when browsing a partitioned table.
  541. # A positive value will be set as the LIMIT. If 0 or negative, do not set any limit.
  542. ## browse_partitioned_table_limit=250
  543. # A limit to the number of rows that can be downloaded from a query.
  544. # A value of -1 means there will be no limit.
  545. # A maximum of 65,000 is applied to XLS downloads.
  546. ## download_row_limit=1000000
  547. # Hue will try to close the Hive query when the user leaves the editor page.
  548. # This will free all the query resources in HiveServer2, but also make its results inaccessible.
  549. ## close_queries=false
  550. [[ssl]]
  551. # SSL communication enabled for this server.
  552. ## enabled=false
  553. # Path to Certificate Authority certificates.
  554. ## cacerts=/etc/hue/cacerts.pem
  555. # Path to the private key file.
  556. ## key=/etc/hue/key.pem
  557. # Path to the public certificate file.
  558. ## cert=/etc/hue/cert.pem
  559. # Choose whether Hue should validate certificates received from the server.
  560. ## validate=true
  561. ###########################################################################
  562. # Settings to configure Pig
  563. ###########################################################################
  564. [pig]
  565. # Location of piggybank.jar on local filesystem.
  566. ## local_sample_dir=/usr/share/hue/apps/pig/examples
  567. # Location piggybank.jar will be copied to in HDFS.
  568. ## remote_data_dir=/user/hue/pig/examples
  569. ###########################################################################
  570. # Settings to configure Sqoop
  571. ###########################################################################
  572. [sqoop]
  573. # For autocompletion, fill out the librdbms section.
  574. # Sqoop server URL
  575. ## server_url=http://localhost:12000/sqoop
  576. ###########################################################################
  577. # Settings to configure Proxy
  578. ###########################################################################
  579. [proxy]
  580. # Comma-separated list of regular expressions,
  581. # which match 'host:port' of requested proxy target.
  582. ## whitelist=(localhost|127\.0\.0\.1):(50030|50070|50060|50075)
  583. # Comma-separated list of regular expressions,
  584. # which match any prefix of 'host:port/path' of requested proxy target.
  585. # This does not support matching GET parameters.
  586. ## blacklist=
  587. ###########################################################################
  588. # Settings to configure Impala
  589. ###########################################################################
  590. [impala]
  591. # Host of the Impala Server (one of the Impalad)
  592. ## server_host=localhost
  593. # Port of the Impala Server
  594. ## server_port=21050
  595. # Kerberos principal
  596. ## impala_principal=impala/hostname.foo.com
  597. # Turn on/off impersonation mechanism when talking to Impala
  598. ## impersonation_enabled=False
  599. # Number of initial rows of a result set to ask Impala to cache in order
  600. # to support re-fetching them for downloading them.
  601. # Set to 0 for disabling the option and backward compatibility.
  602. ## querycache_rows=50000
  603. # Timeout in seconds for thrift calls
  604. ## server_conn_timeout=120
  605. # Hue will try to close the Impala query when the user leaves the editor page.
  606. # This will free all the query resources in Impala, but also make its results inaccessible.
  607. ## close_queries=true
  608. ###########################################################################
  609. # Settings to configure HBase Browser
  610. ###########################################################################
  611. [hbase]
  612. # Comma-separated list of HBase Thrift servers for
  613. # clusters in the format of '(name|host:port)'.
  614. ## hbase_clusters=(Cluster|localhost:9090)
  615. # Hard limit of rows or columns per row fetched before truncating.
  616. ## truncate_limit = 500
  617. # 'buffered' is the default of the HBase Thrift Server.
  618. # 'framed' can be used to chunk up responses,
  619. # which is useful when used in conjunction with the nonblocking server in Thrift.
  620. ## thrift_transport=buffered
  621. ###########################################################################
  622. # Settings to configure Solr Search
  623. ###########################################################################
  624. [search]
  625. # URL of the Solr Server
  626. ## solr_url=http://localhost:8983/solr/
  627. # Requires FQDN in solr_url if enabled
  628. ## security_enabled=false
  629. ## Query sent when no term is entered
  630. ## empty_query=*:*
  631. ###########################################################################
  632. # Settings to configure Solr Indexer
  633. ###########################################################################
  634. [indexer]
  635. # Location of the solrctl binary.
  636. ## solrctl_path=/usr/bin/solrctl
  637. # Location of the solr home.
  638. ## solr_home=/usr/lib/solr
  639. # Zookeeper ensemble.
  640. ## solr_zk_ensemble=localhost:2181/solr
  641. # The contents of this directory will be copied over to the solrctl host to its temporary directory.
  642. ## config_template_path=/../hue/desktop/libs/indexer/src/data/solr_configs
  643. ###########################################################################
  644. # Settings to configure Job Designer
  645. ###########################################################################
  646. [jobsub]
  647. # Location on local FS where examples and template are stored.
  648. ## local_data_dir=..../data
  649. # Location on local FS where sample data is stored
  650. ## sample_data_dir=...thirdparty/sample_data
  651. ###########################################################################
  652. # Settings to configure Job Browser
  653. ###########################################################################
  654. [jobbrowser]
  655. # Share submitted jobs information with all users. If set to false,
  656. # submitted jobs are visible only to the owner and administrators.
  657. ## share_jobs=true
  658. ###########################################################################
  659. # Settings to configure the Zookeeper application.
  660. ###########################################################################
  661. [zookeeper]
  662. [[clusters]]
  663. [[[default]]]
  664. # Zookeeper ensemble. Comma separated list of Host/Port.
  665. # e.g. localhost:2181,localhost:2182,localhost:2183
  666. ## host_ports=localhost:2181
  667. # The URL of the REST contrib service (required for znode browsing)
  668. ## rest_url=http://localhost:9998
  669. ###########################################################################
  670. # Settings to configure the Spark application.
  671. ###########################################################################
  672. [spark]
  673. # URL of the REST Spark Job Server.
  674. ## server_url=http://localhost:8090/
  675. ###########################################################################
  676. # Settings for the User Admin application
  677. ###########################################################################
  678. [useradmin]
  679. # The name of the default user group that users will be a member of
  680. ## default_user_group=default