pseudo-distributed.ini.tmpl 18 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578
  1. #####################################
  2. # DEVELOPMENT EDITION
  3. #####################################
  4. # Hue configuration file
  5. # ===================================
  6. #
  7. # For complete documentation about the contents of this file, run
  8. # $ <hue_root>/build/env/bin/hue config_help
  9. #
  10. # All .ini files under the current directory are treated equally. Their
  11. # contents are merged to form the Hue configuration, which can
  12. # can be viewed on the Hue at
  13. # http://<hue_host>:<port>/dump_config
  14. ###########################################################################
  15. # General configuration for core Desktop features (authentication, etc)
  16. ###########################################################################
  17. [desktop]
  18. send_dbug_messages=1
  19. # To show database transactions, set database_logging to 1
  20. database_logging=0
  21. # Set this to a random string, the longer the better.
  22. # This is used for secure hashing in the session store.
  23. secret_key=
  24. # Webserver listens on this address and port
  25. http_host=0.0.0.0
  26. http_port=8000
  27. # Time zone name
  28. time_zone=America/Los_Angeles
  29. # Enable or disable Django debug mode
  30. ## django_debug_mode=true
  31. # Enable or disable backtrace for server error
  32. ## http_500_debug_mode=true
  33. # Server email for internal error messages
  34. ## django_server_email='hue@localhost.localdomain'
  35. # Email backend
  36. ## django_email_backend=django.core.mail.backends.smtp.EmailBackend
  37. # Webserver runs as this user
  38. ## server_user=hue
  39. ## server_group=hue
  40. # If set to false, runcpserver will not actually start the web server.
  41. # Used if Apache is being used as a WSGI container.
  42. ## enable_server=yes
  43. # Number of threads used by the CherryPy web server
  44. ## cherrypy_server_threads=10
  45. # Filename of SSL Certificate
  46. ## ssl_certificate=
  47. # Filename of SSL RSA Private Key
  48. ## ssl_private_key=
  49. # Default encoding for site data
  50. ## default_site_encoding=utf-8
  51. # Help improve Hue with anonymous usage analytics.
  52. # Use Google Analytics to see how many times an application or specific section of an application is used, nothing more.
  53. ## collect_usage=true
  54. # Administrators
  55. # ----------------
  56. [[django_admins]]
  57. ## [[[admin1]]]
  58. ## name=john
  59. ## email=john@doe.com
  60. # UI customizations
  61. # -------------------
  62. [[custom]]
  63. # Top banner HTML code
  64. ## banner_top_html=
  65. # Configuration options for user authentication into the web application
  66. # ------------------------------------------------------------------------
  67. [[auth]]
  68. # Authentication backend. Common settings are:
  69. # - django.contrib.auth.backends.ModelBackend (entirely Django backend)
  70. # - desktop.auth.backend.AllowAllBackend (allows everyone)
  71. # - desktop.auth.backend.AllowFirstUserDjangoBackend
  72. # (Default. Relies on Django and user manager, after the first login)
  73. # - desktop.auth.backend.LdapBackend
  74. # - desktop.auth.backend.PamBackend
  75. # - desktop.auth.backend.SpnegoDjangoBackend
  76. # - desktop.auth.backend.RemoteUserDjangoBackend
  77. # - desktop.auth.backend.OAuthBackend
  78. # - huesaml.backend.SAML2Backend
  79. ## backend=desktop.auth.backend.AllowFirstUserDjangoBackend
  80. # Backend to synchronize user-group membership with
  81. ## user_group_membership_synchronization_backend=desktop.auth.backend.LdapSynchronizationBackend
  82. ## pam_service=login
  83. # When using the desktop.auth.backend.RemoteUserDjangoBackend, this sets
  84. # the normalized name of the header that contains the remote user.
  85. # The HTTP header in the request is converted to a key by converting
  86. # all characters to uppercase, replacing any hyphens with underscores
  87. # and adding an HTTP_ prefix to the name. So, for example, if the header
  88. # is called Remote-User that would be configured as HTTP_REMOTE_USER
  89. #
  90. # Defaults to HTTP_REMOTE_USER
  91. ## remote_user_header=HTTP_REMOTE_USER
  92. # Configuration options for connecting to LDAP and Active Directory
  93. # -------------------------------------------------------------------
  94. [[ldap]]
  95. # The search base for finding users and groups
  96. ## base_dn="DC=mycompany,DC=com"
  97. # URL of the LDAP server
  98. ## ldap_url=ldap://auth.mycompany.com
  99. # A PEM-format file containing certificates for the CA's that
  100. # Hue will trust for authentication over TLS.
  101. # The certificate for the CA that signed the
  102. # LDAP server certificate must be included among these certificates.
  103. # See more here http://www.openldap.org/doc/admin24/tls.html.
  104. ## ldap_cert=
  105. ## use_start_tls=true
  106. # Distinguished name of the user to bind as -- not necessary if the LDAP server
  107. # supports anonymous searches
  108. ## bind_dn="CN=ServiceAccount,DC=mycompany,DC=com"
  109. # Password of the bind user -- not necessary if the LDAP server supports
  110. # anonymous searches
  111. ## bind_password=
  112. # Create users in Hue when they try to login with their LDAP credentials
  113. # For use when using LdapBackend for Hue authentication
  114. ## create_users_on_login = true
  115. [[[users]]]
  116. # Base filter for searching for users
  117. ## user_filter="objectclass=*"
  118. # The username attribute in the LDAP schema
  119. ## user_name_attr=sAMAccountName
  120. [[[groups]]]
  121. # Base filter for searching for groups
  122. ## group_filter="objectclass=*"
  123. # The username attribute in the LDAP schema
  124. ## group_name_attr=cn
  125. # Configuration options for specifying the Desktop Database. For more info,
  126. # see http://docs.djangoproject.com/en/1.1/ref/settings/#database-engine
  127. # ------------------------------------------------------------------------
  128. [[database]]
  129. # Database engine is typically one of:
  130. # postgresql_psycopg2, mysql, or sqlite3
  131. #
  132. # Note that for sqlite3, 'name', below is a filename;
  133. # for other backends, it is the database name.
  134. ## engine=sqlite3
  135. ## host=
  136. ## port=
  137. ## user=
  138. ## password=
  139. ## name=desktop/desktop.db
  140. # Configuration options for connecting to an external SMTP server
  141. # ------------------------------------------------------------------------
  142. [[smtp]]
  143. # The SMTP server information for email notification delivery
  144. host=localhost
  145. port=25
  146. user=
  147. password=
  148. # Whether to use a TLS (secure) connection when talking to the SMTP server
  149. tls=no
  150. # Default email address to use for various automated notification from Hue
  151. ## default_from_email=hue@localhost
  152. # Configuration options for Kerberos integration for secured Hadoop clusters
  153. # ------------------------------------------------------------------------
  154. [[kerberos]]
  155. # Path to Hue's Kerberos keytab file
  156. ## hue_keytab=
  157. # Kerberos principal name for Hue
  158. ## hue_principal=hue/hostname.foo.com
  159. # Path to kinit
  160. ## kinit_path=/path/to/kinit
  161. # Configuration options for using OAuthBackend login
  162. # ------------------------------------------------------------------------
  163. [[oauth]]
  164. # The Consumer key of the application
  165. ## consumer_key=XXXXXXXXXXXXXXXXXXXXX
  166. # The Consumer secret of the application
  167. ## consumer_secret=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  168. # The Request token URL
  169. ## request_token_url=https://api.twitter.com/oauth/request_token
  170. # The Access token URL
  171. ## access_token_url=https://api.twitter.com/oauth/access_token
  172. # The Authorize URL
  173. ## authenticate_url=https://api.twitter.com/oauth/authorize
  174. ###########################################################################
  175. # Settings to configure SAML
  176. ###########################################################################
  177. [saml]
  178. # Xmlsec1 binary path. This program should be executable by the user running Hue.
  179. ## xmlsec_binary=/usr/local/bin/xmlsec1
  180. # Create users from SSO on login.
  181. ## create_users_on_login=true
  182. # Globally unique identifier of the entity.
  183. ## entity_id=http://localhost:8888/saml2/metadata/
  184. # Consumes assertions sent back from IdP.
  185. ## assertion_consumer_service_uri=http://localhost:8888/saml2/acs/
  186. # Logout using the SSO provider.
  187. ## single_logout_service=http://localhost:8888/saml2/ls/
  188. # Required attributes to ask for from IdP.
  189. ## required_attributes=uid
  190. # Optional attributes to ask for from IdP.
  191. ## optional_attributes=true
  192. # IdP metadata in the form of a file. This is generally an XML file containing metadata that the Identity Provider generates.
  193. ## metadata_file=
  194. # Private key to encrypt metadata with.
  195. ## key_file=
  196. # Signed certificate to send along with encrypted metadata.
  197. ## cert_file=
  198. # A mapping from attributes in the response from the IdP to django user attributes.
  199. ## user_attribute_mapping={'uid':'username'}
  200. ###########################################################################
  201. # Settings to configure your Hadoop cluster.
  202. ###########################################################################
  203. [hadoop]
  204. # Configuration for HDFS NameNode
  205. # ------------------------------------------------------------------------
  206. [[hdfs_clusters]]
  207. # HA support by using HttpFs
  208. [[[default]]]
  209. # Enter the filesystem uri
  210. fs_defaultfs=hdfs://localhost:8020
  211. # Use WebHdfs/HttpFs as the communication mechanism. To fallback to
  212. # using the Thrift plugin (used in Hue 1.x), this must be uncommented
  213. # and explicitly set to the empty value.
  214. ## webhdfs_url=
  215. ## security_enabled=false
  216. # Settings about this HDFS cluster. If you install HDFS in a
  217. # different location, you need to set the following.
  218. # Defaults to $HADOOP_HDFS_HOME or /usr/lib/hadoop-hdfs
  219. ## hadoop_hdfs_home=/usr/lib/hadoop-hdfs
  220. # Defaults to $HADOOP_BIN or /usr/bin/hadoop
  221. ## hadoop_bin=/usr/bin/hadoop
  222. # Defaults to $HADOOP_CONF_DIR or /etc/hadoop/conf
  223. ## hadoop_conf_dir=/etc/hadoop/conf
  224. # Configuration for MapReduce 0.20 JobTracker (MR1)
  225. # ------------------------------------------------------------------------
  226. [[mapred_clusters]]
  227. [[[default]]]
  228. # Enter the host on which you are running the Hadoop JobTracker
  229. jobtracker_host=localhost
  230. # The port where the JobTracker IPC listens on
  231. jobtracker_port=8021
  232. # Thrift plug-in port for the JobTracker
  233. ## thrift_port=9290
  234. # Whether to submit jobs to this cluster
  235. ## submit_to=True
  236. # Change this if your MapReduce cluster is Kerberos-secured
  237. ## security_enabled=false
  238. # Settings about this MR1 cluster. If you install MR1 in a
  239. # different location, you need to set the following.
  240. # Defaults to $HADOOP_MR1_HOME or /usr/lib/hadoop-0.20-mapreduce
  241. ## hadoop_mapred_home=/usr/lib/hadoop-0.20-mapreduce
  242. # Defaults to $HADOOP_BIN or /usr/bin/hadoop
  243. ## hadoop_bin=/usr/bin/hadoop
  244. # Defaults to $HADOOP_CONF_DIR or /etc/hadoop/conf
  245. ## hadoop_conf_dir=/etc/hadoop/conf
  246. # HA support by specifying multiple clusters
  247. # e.g.
  248. # [[[ha]]]
  249. # Enter the host on which you are running the failover JobTracker
  250. # jobtracker_host=localhost-ha
  251. # Configuration for Yarn
  252. # ------------------------------------------------------------------------
  253. [[yarn_clusters]]
  254. [[[default]]]
  255. # Enter the host on which you are running the ResourceManager
  256. resourcemanager_host=localhost
  257. # The port where the ResourceManager IPC listens on
  258. resourcemanager_port=8032
  259. # Whether to submit jobs to this cluster
  260. ## submit_to=False
  261. ## security_enabled=false
  262. # Settings about this MR2 cluster. If you install MR2 in a
  263. # different location, you need to set the following.
  264. # Defaults to $HADOOP_MR2_HOME or /usr/lib/hadoop-mapreduce
  265. ## hadoop_mapred_home=/usr/lib/hadoop-mapreduce
  266. # Defaults to $HADOOP_BIN or /usr/bin/hadoop
  267. ## hadoop_bin=/usr/bin/hadoop
  268. # Defaults to $HADOOP_CONF_DIR or /etc/hadoop/conf
  269. ## hadoop_conf_dir=/etc/hadoop/conf
  270. # URL of the ResourceManager API
  271. ## resourcemanager_api_url=http://localhost:8088
  272. # URL of the ProxyServer API
  273. ## proxy_api_url=http://localhost:8088
  274. # URL of the HistoryServer API
  275. history_server_api_url=http://localhost:19888
  276. # URL of the NodeManager API
  277. node_manager_api_url=http://localhost:8042
  278. ###########################################################################
  279. # Settings to configure liboozie
  280. ###########################################################################
  281. [liboozie]
  282. # The URL where the Oozie service runs on. This is required in order for
  283. # users to submit jobs.
  284. ## oozie_url=http://localhost:11000/oozie
  285. # Requires FQDN in oozie_url if enabled
  286. ## security_enabled=false
  287. # Location on HDFS where the workflows/coordinator are deployed when submitted.
  288. ## remote_deployement_dir=/user/hue/oozie/deployments
  289. ###########################################################################
  290. # Settings to configure the Oozie app
  291. ###########################################################################
  292. [oozie]
  293. # Location on local FS where the examples are stored.
  294. ## local_data_dir=..../examples
  295. # Location on local FS where the data for the examples is stored.
  296. ## sample_data_dir=...thirdparty/sample_data
  297. # Location on HDFS where the oozie examples and workflows are stored.
  298. ## remote_data_dir=/user/hue/oozie/workspaces
  299. # Share workflows and coordinators information with all users. If set to false,
  300. # they will be visible only to the owner and administrators.
  301. ## share_jobs=True
  302. # Maximum of Oozie workflows or coodinators to retrieve in one API call.
  303. ## oozie_jobs_count=100
  304. ###########################################################################
  305. # Settings to configure Beeswax with Hive
  306. ###########################################################################
  307. [beeswax]
  308. # Host where Hive server Thrift daemon is running.
  309. # If Kerberos security is enabled, use fully-qualified domain name (FQDN).
  310. ## hive_server_host=<FQDN of Hive Server>
  311. # Port where HiveServer2 Thrift server runs on.
  312. ## hive_server_port=10000
  313. # Hive configuration directory, where hive-site.xml is located
  314. ## hive_conf_dir=/etc/hive/conf
  315. # Timeout in seconds for thrift calls to Hive service
  316. ## server_conn_timeout=120
  317. # Share saved queries with all users. If set to false, saved queries are
  318. # visible only to the owner and administrators.
  319. ## share_saved_queries=true
  320. # Path to HiveServer2 start script
  321. ## hive_server_bin=/usr/lib/hive/bin/hiveserver2
  322. # Set a LIMIT clause when browsing a partitioned table.
  323. # A positive value will be set as the LIMIT. If 0 or negative, do not set any limit.
  324. ## browse_partitioned_table_limit=250
  325. ###########################################################################
  326. # Settings to configure Pig
  327. ###########################################################################
  328. [pig]
  329. # Location of piggybank.jar on local filesystem.
  330. ## local_sample_dir=/usr/share/hue/apps/pig/examples
  331. # Location piggybank.jar will be copied to in HDFS.
  332. ## remote_data_dir=/user/hue/pig/examples
  333. ###########################################################################
  334. # Settings to configure Sqoop
  335. ###########################################################################
  336. [sqoop]
  337. # Sqoop server URL
  338. ## server_url=http://localhost:12000/sqoop
  339. ###########################################################################
  340. # Settings to configure Proxy
  341. ###########################################################################
  342. [proxy]
  343. # Comma-separated list of regular expressions,
  344. # which match 'host:port' of requested proxy target.
  345. ## whitelist=(localhost|127\.0\.0\.1):(50030|50070|50060|50075)
  346. # Comma-separated list of regular expressions,
  347. # which match any prefix of 'host:port/path' of requested proxy target.
  348. # This does not support matching GET parameters.
  349. ## blacklist=()
  350. ###########################################################################
  351. # Settings to configure Impala
  352. ###########################################################################
  353. [impala]
  354. # Host of the Impala Server (one of the Impalad)
  355. ## server_host=localhost
  356. # Port of the Impala Server
  357. ## server_port=21050
  358. # Kerberos principal
  359. ## impala_principal=impala/hostname.foo.com
  360. # Turn on/off impersonation mechanism when talking to Impala
  361. ## impersonation_enabled=False
  362. ###########################################################################
  363. # Settings to configure Hbase
  364. ###########################################################################
  365. [hbase]
  366. # Comma-separated list of HBase Thrift servers for
  367. # clusters in the format of '(name|host:port)'.
  368. ## hbase_clusters=(Cluster|localhost:9090)
  369. # Hard limit of rows or columns per row fetched before truncating.
  370. ## truncate_limit = 500
  371. ###########################################################################
  372. # Settings to configure Solr Search
  373. ###########################################################################
  374. [search]
  375. # URL of the Solr Server
  376. ## solr_url=http://localhost:8983/solr/
  377. # Requires FQDN in solr_url if enabled
  378. ## security_enabled=false
  379. ## Query sent when no term is entered
  380. ## empty_query=*:*
  381. ###########################################################################
  382. # Settings to configure Job Designer
  383. ###########################################################################
  384. [jobsub]
  385. # Location on local FS where examples and template are stored.
  386. ## local_data_dir=..../data
  387. # Location on local FS where sample data is stored
  388. ## sample_data_dir=...thirdparty/sample_data
  389. ###########################################################################
  390. # Settings to configure Job Browser
  391. ###########################################################################
  392. [jobbrowser]
  393. # Share submitted jobs information with all users. If set to false,
  394. # submitted jobs are visible only to the owner and administrators.
  395. ## share_jobs=true
  396. ###########################################################################
  397. # Settings to configure the Zookeeper application.
  398. ###########################################################################
  399. [zookeeper]
  400. [[clusters]]
  401. [[[default]]]
  402. # Zookeeper ensemble. Comma separated list of Host/Port.
  403. # e.g. localhost:2181,localhost:2182,localhost:2183
  404. ## host_ports=localhost:2181
  405. # The URL of the REST contrib service (required for znode browsing)
  406. ## rest_url=http://localhost:9998
  407. ###########################################################################
  408. # Settings for the User Admin application
  409. ###########################################################################
  410. [useradmin]
  411. # The name of the default user group that users will be a member of
  412. ## default_user_group=default